JPI Sensors with G3X Touch

Discussion in 'Avionics and Upgrades' started by Adam Weiss, Mar 17, 2020.

  1. Adam Weiss

    Adam Weiss Pre-takeoff checklist

    Joined:
    Aug 10, 2017
    Messages:
    252
    Location:
    KLXT
    Display Name:

    Display name:
    kcmopilot
    Does anyone know if the sensors for the JPI EDM900 will work with a GEA 24 interface module for G3X?
    I'm doing a panel upgrade to G3X Touch, and would like to reuse the sensors if I can.
    Thanks!
     
  2. asicer

    asicer En-Route

    Joined:
    Jan 1, 2015
    Messages:
    4,982
    Display Name:

    Display name:
    asicer
    My Garmin dealer says "yes". However, given the hierarchy that Garmin has so carefully built up, your Garmin dealer will be the one with the final say.
     
  3. Adam Weiss

    Adam Weiss Pre-takeoff checklist

    Joined:
    Aug 10, 2017
    Messages:
    252
    Location:
    KLXT
    Display Name:

    Display name:
    kcmopilot
    Thanks. I was wondering if they would be electrically compatible. I have an experimental and will do my own install, so I don’t care too much what the dealer says.
     
  4. bnt83

    bnt83 Final Approach PoA Supporter

    Joined:
    Dec 31, 2012
    Messages:
    8,922
    Location:
    Lincoln NE
    Display Name:

    Display name:
    Brian
    Should be most of them approved, might have to change a few

    http://static.garmin.com/pumac/190-02472-02_04.pdf#page162
     

    Attached Files:

  5. Adam Weiss

    Adam Weiss Pre-takeoff checklist

    Joined:
    Aug 10, 2017
    Messages:
    252
    Location:
    KLXT
    Display Name:

    Display name:
    kcmopilot