JPI Sensors with G3X Touch

[Adam Weiss]

Does anyone know if the sensors for the JPI EDM900 will work with a GEA 24 interface module for G3X?
I'm doing a panel upgrade to G3X Touch, and would like to reuse the sensors if I can.
Thanks!

 

[asicer]

My Garmin dealer says "yes". However, given the hierarchy that Garmin has so carefully built up, your Garmin dealer will be the one with the final say.

 

[Adam Weiss]

My Garmin dealer says "yes". However, given the hierarchy that Garmin has so carefully built up, your Garmin dealer will be the one with the final say.

Thanks. I was wondering if they would be electrically compatible. I have an experimental and will do my own install, so I don’t care too much what the dealer says.

 

[bnt83]

Thanks. I was wondering if they would be electrically compatible. I have an experimental and will do my own install, so I don’t care too much what the dealer says.

Should be most of them approved, might have to change a few

http://static.garmin.com/pumac/190-02472-02_04.pdf#page162

 

[Adam Weiss]

Should be most of them approved, might have to change a few

http://static.garmin.com/pumac/190-02472-02_04.pdf#page162

This is perfect. Thank you!