bnt83

That sucks. I'm guessing there are no PMA crankshaft for that engine either. I'd start calling other shops and try continental...

Life rafts do not belong in the empty weight of the aircraft and operations need to be responsible for them being removed or installed...

Could be charging system related, I wouldn't bother.

If the normal running load plus a downstream overload trips the 20 amp CB switch disconnecting all the equipment at the same time rather...

might need to contact EI

The dimmer input signal circuit is very sensitive to voltage changes...$0.02

One engine monitor wiring management idea. (For your new engine monitor)

Looks wrong to me. The washer under the nut should be tight on the wire, and the wire needs bent into a hook to prevent it from being...

https://ciescorp.net/ I put these floats in our 182L paired with an Aerospace Logic fuel gauge and never looked back.

Frankly, I'd recommend you replace it all with EI's new senders and fuel indicators. It's a world of difference than the 1950's era...

What does your STC say? The Airplane Flight Manual Supplement typically says 1% or less.

So after all these years my 830 is finally working right. When I first contacted JPI two different techs kept giving me different...

Definitely enjoyed his presence here. You will be missed . I noticed he hasn't been around much.

That hi-temp silicone rescue tape works great on stuff like this. https://www.aircraftspruce.com/catalog/appages/uniwrap.php

I didn't even know those Ferrules existed! I need to try one of those kits.