GlennAB1
Ejection Handle Pulled
- Joined
- Oct 5, 2015
- Messages
- 4,889
- Location
- Home will always be Vandalia, OH
- Display Name
Display name:
GlennAB1
Only a buffoon calls a 15+ year chemist
"Pofessor gobble gook"
"Pofessor gobble gook"
there ya go again, reading it wrong again.Only a buffoon calls a 15+ year chemist
"Pofessor gobble gook"
I think you are right,, arguing with an idiot they just drag you down to their level and beat you with experience.Ok, guys. Both of you need to let it go.
Been working on my new project all day, off and on as I please.Shouldn't you guys be out fixing planes or something??? You guys spend too much time on this forum lmao
Or this:What will it harm if the row of rivets are put in?
If there is no wear, don't mess with it. IOWs if it ain't broke don't fix it until it is.
There ya go, taking issue with me asking questions.So, you are going with revision 3, not this:
Or this:
...after all they are licensed mechanics that were taught in A&P school how to repair aircraft. unlike glen who must have a book to tell him how to do anything.
My mechanic seems to think that we need to remove it, clean off the adhesive, re-glue it and rivet it back together. I say that is overkill but he'll do whatever the tech guy says.
Your mechanic is probably correct.
You wanted to know what I'd do, if it were my plane, I'd blow it out with shop air to remove all the dust, mask it off, shoot sealant under it, smooth the sealant, remove the tape, and be done. I wouldn't put epoxy back in there, it's already proved to fail.
IF ---- IF I were your A&P-IA I'd .... run a bead of epoxy structural adhesive on both, and replace while wet. with 2 rivets in the same holes.
Waffling.How do you know it was epoxy to start ?
Do you have an approved procedure for that?
How would you sign it off, for return to service?
Isn't it really up to your A&P to make the decision as to how to fix?
Good luck with thatI'm using a special blend of epoxy consisting of dried seaweed and snot.
There's the voice of experience.cow snot works better.
So....how did you come up with that?Good luck with that
cow snot works better.
Old Farm boy..So....how did you come up with that?
Probably has a subscription to Plowboy Magazine.Old Farm boy..
A better source than a job card or the internet.Probably has a subscription to Plowboy Magazine.
Along with "Boats are us"?A better source than a job card or the internet.
add Vintage aircraft from EAA and The national Rifleman from you know whereAlong with "Boats are us"?
Alright, you ain't all bad.add Vintage aircraft from EAA and The national Rifleman from you know where
That **** should be outlawed.
I to MD-10, over you to Piper. (no offense meant here, but simply filling an empty pitcher, over changing the contents of a full pitcher)Since airplanes are airplanes. You want to wager who could transition quicker, you to MD-10s, or I to Pipers?