Insight Gemini 1200

Discussion in 'Avionics and Upgrades' started by Aviator12, Mar 25, 2017.

  1. Aviator12

    Aviator12 Filing Flight Plan

    Joined:
    Mar 25, 2017
    Messages:
    2

    Display name:
    Aviator12
    I am flying an airplane equipped with an Insight Gemini 1200 engine monitor. Because of its age this engine monitor is no longer supported by the manufacturer. I do have the manual, but I was not able to figurate all the information necessary for operation. Could somebody kindly answer the following questions?

    • How can I change the ‘Digital Numeric Display’ to show CHT or EGT or Turbine Inlet Temperature (TIT) or Outside Air Temperature (OAT)?
    • When entering the Lean Mode, will the ‘Digital Numeric Display’ automatically display EGT, irrespective of whether it was showing CHT or EGT or TIT or OAT earlier? Or it is necessary to select EGT in the ‘Digital Numeric Display’ before entering the Lean Mode?
    • When entering the Lean Mode, will the ‘Digital Numeric Display’ show the highest EGT or will it show the EGT of the cylinder selected with the ‘Select’ button?

    Any link or reference to documentation that supplements the Gemini 1200 manual will also be welcome.

    Many thanks
     
  2. Clark1961

    Clark1961 Touchdown! Greaser!

    Joined:
    Jun 7, 2008
    Messages:
    17,746

    Display name:
    Display name:
    KA550 and SkyDog58 like this.
  3. SkyDog58

    SkyDog58 Touchdown! Greaser!

    Joined:
    Jun 11, 2015
    Messages:
    13,572
    Location:
    My own special place.

    Display name:
    Canis Non Grata
    RTFM is always step one.
     
  4. Clark1961

    Clark1961 Touchdown! Greaser!

    Joined:
    Jun 7, 2008
    Messages:
    17,746

    Display name:
    Display name:
    The manual appears to be written by marketing guys but the info is in there.
     
  5. Aviator12

    Aviator12 Filing Flight Plan

    Joined:
    Mar 25, 2017
    Messages:
    2

    Display name:
    Aviator12
    Thanks to All. I am in the process of reading the manual again.