cowman
Final Approach
Just got this airplane, didn't notice this in CDI mode but quickly found it in VLOC when we tried tuning in a VOR.
In the diag screen the OBS is erratic, seems like there's almost a dead zone.
Tried going through a calibration screen where you set it to 150... 150 reads ok but again it barely reaponds when being turned. Readings are always off and often don't change while turning the knob.
Anyone got any ideas/suggestions?
In the diag screen the OBS is erratic, seems like there's almost a dead zone.
Tried going through a calibration screen where you set it to 150... 150 reads ok but again it barely reaponds when being turned. Readings are always off and often don't change while turning the knob.
Anyone got any ideas/suggestions?