AggieMike88
Touchdown! Greaser!
- Joined
- Jan 13, 2010
- Messages
- 20,805
- Location
- Denton, TX
- Display Name
Display name:
The original "I don't know it all" of aviation.
My question du jour is: Can we get the ADS-B In Traffic feed from the GTX345 to show up on our CNX80/480 box?
Our club 182 has a CNX80, and we had installed the GTX345 to take care of the ADS-B In and Out requirements.
I've noticed that the two devices are taking with one another.
What we don't have going on at the moment is display of Traffic. When you go to that page/screen on the CNX80, "NO TRAFFIC SOURCE" (or something like it) is shown.
Google-fu found an installation manual for the GNS480, which shows
. (click image to expand)
_____________________________________
And if not from the GTX345, is there a different device that would accomplish this?
Our club 182 has a CNX80, and we had installed the GTX345 to take care of the ADS-B In and Out requirements.
I've noticed that the two devices are taking with one another.
- I can input a transponder code via the CNX80 and the GTX345 accepts it.
- And the GTX345 appears to be populating certain data fields on the CNX80.
What we don't have going on at the moment is display of Traffic. When you go to that page/screen on the CNX80, "NO TRAFFIC SOURCE" (or something like it) is shown.
Google-fu found an installation manual for the GNS480, which shows
. (click image to expand)
_____________________________________
And if not from the GTX345, is there a different device that would accomplish this?