GeorgeC Administrator Management Council Member Joined Dec 5, 2010 Messages 5,155 Display Name Display name: GeorgeC Jun 11, 2018 #1 Is there a way to tell the Garmin WAAS vs. non-WAAS GPS pucks apart visually?
bnt83 Final Approach Joined Dec 31, 2012 Messages 9,853 Location Lincoln NE Display Name Display name: Brian Jun 11, 2018 #2 Part number on the tag or TSO number should do it. Far as I know all WAAS antennas have a TNC but some non-waas probably do too
Part number on the tag or TSO number should do it. Far as I know all WAAS antennas have a TNC but some non-waas probably do too
GeorgeC Administrator Management Council Member Joined Dec 5, 2010 Messages 5,155 Display Name Display name: GeorgeC Jun 12, 2018 #3 Thanks; I meant if it's already installed. Might be able to see the connector with an inspection mirror though.
Thanks; I meant if it's already installed. Might be able to see the connector with an inspection mirror though.
bnt83 Final Approach Joined Dec 31, 2012 Messages 9,853 Location Lincoln NE Display Name Display name: Brian Jun 12, 2018 #4 GA56 has studs, GA35 has thru holes for screws. GA35 won't have Garmin logo on it, GA56 likely does.
GeorgeC Administrator Management Council Member Joined Dec 5, 2010 Messages 5,155 Display Name Display name: GeorgeC Jun 12, 2018 #5 Thanks. I was surprised to learn I had a GA35, previously hooked up to my non-WAAS 430, now to the 335.
Thanks. I was surprised to learn I had a GA35, previously hooked up to my non-WAAS 430, now to the 335.