Tomorrow I'm going to pick up a mouse-proof dryer vent.
Rich
So that's why the laundry smelled funny...
- Thread starter RJM62
- Start date
Tomorrow I'm going to pick up a mouse-proof dryer vent.
Rich
The post-mortem.
- Joined
- Sep 6, 2011
- Messages
- 10,998
- Location
- Twin Cities, MN
- Display Name
- Jonesy
- Home Airfield
- KMSP / KFCM / KSGS
Maybe he was just running the wheel? 
Let'sgoflying!
Touchdown! Greaser!
You haven't lived bad smells, til yo-u start an old gas stove which has a few years of mouse urine, feces, dead bodies in the insulation - whuf.
G-Man
Cleared for Takeoff
- Joined
- Nov 13, 2012
- Messages
- 1,091
- Location
- Boulder, CO
- Display Name
- AirmanG
- Home Airfield
- KBJC KBDU
Its last words: "I'm so dizzy I think I'm gonna die!"
This should keep them out.
Rich
Rich
FlySince9
En-Route
EEEEK! YUK!
Checkout_my_Six
Touchdown! Greaser!
the poor lil immigrant.....never could figure out how to assimilate. 
FlySince9
En-Route
was his name, Dusty?
BigBadLou
Final Approach
Sure looks like an old Honda engine. 
Thank Jebus I had already installed a metal-mesh-with-flap vent about 10 years ago. It keeps the dumba**es out. Your picture shows exactly what I feared when I installed the vent. Whew!
Thank Jebus I had already installed a metal-mesh-with-flap vent about 10 years ago. It keeps the dumba**es out. Your picture shows exactly what I feared when I installed the vent. Whew!
Jeff Oslick
Final Approach
- Joined
- Mar 12, 2005
- Messages
- 5,309
- Location
- Fullerton, CA
- Display Name
- Jeff Oslick
- Home Airfield
- KFUL
groan...
Matthew
Touchdown! Greaser!
It was a dry heat.
Unbeliever
Pre-takeoff checklist
Matthew
Touchdown! Greaser!
Jeez, you need to check your pockets before you do laundry.
FlySince9
En-Route
I don't care who you are...That's FUNNY!
Sure looks like an old Honda engine.
Thank Jebus I had already installed a metal-mesh-with-flap vent about 10 years ago. It keeps the dumba**es out. Your picture shows exactly what I feared when I installed the vent. Whew!
It took about an hour to install that vent. That's about a third what it took last night to find the mouse, disassemble enough of the dryer to get it out, and reassemble the dryer.
The vent has an upwards-facing air outlet inside that's topped by an inverted plastic cup that can ride up and down inside a cage of vertical rails. The air coming out of the vent pushes up the cup. When the air stops, it comes back down. Simple enough. I think it should work.
Rich
flhrci
Final Approach
Shades of Lenny Small. (Of mice and men).
Checkout_my_Six
Touchdown! Greaser!
Real French men don't have mice in their pockets......