kontiki
Cleared for Takeoff
- Joined
- May 30, 2011
- Messages
- 1,144
- Display Name
Display name:
Kontiki
I'm just wrapping up after running a bunch of new wire and rerouting a carb heat cable (that was interfering with yoke movement) on my Grumman AA-5B.
What are folks using to seal around feed through holes in the firewall.
I was looking at CS 1900, but thought I'd ask the list.
I haven't worked with the stuff before. See -> http://flamemaster.com/cs-1900/
What are folks using to seal around feed through holes in the firewall.
I was looking at CS 1900, but thought I'd ask the list.
I haven't worked with the stuff before. See -> http://flamemaster.com/cs-1900/