...
Of course now I fly a Cherokee, which still doesn't really need flaps. That said I deploy them, since it's just a Johnson bar which is far less likely to break than electric motors.
It's all fun and games until your prosthetic arm comes off ...
...
Of course now I fly a Cherokee, which still doesn't really need flaps. That said I deploy them, since it's just a Johnson bar which is far less likely to break than electric motors.
I never put down the flaps to preflight my 150 when I had it. My reasoning:
a. Wasn't necessary. The thing landed just fine without them. If they failed to deploy on landing it would be a non event
b. if they stayed down for the takeoff roll I could die
c. they could come down and refuse to come back up. I've seen it happen.
Of course now I fly a Cherokee, which still doesn't really need flaps. That said I deploy them, since it's just a Johnson bar which is far less likely to break than electric motors.
What makes deploying the flaps prior to flight insure it won't stick, or half deploy in the air? All you can say from that test is that they worked at the time they were tested.
Just another reminder to check the Johnson bar or cessna flap switch prior to pushing the throttle in.
No. The flaps are where they are, not where the control says they should be.
This.Especially, try figuring out where the flaps are by looking at a 172M switch. It looks the same at 0 or 40 deg.
So if one does accidentally take off with those giant barn doors hanging down off the wings, what is the "proper" procedure?
My thoughts would be as follows:
1. Oh crap.
2. Airspeed.
3. Retract a little bit
4. Airspeed.
5. Retract a little bit more.
6. Airspeed
7. Eventually you get back to what would be configured for a short field takeoff.
8. Continue as if it was a short field take off for flap retract and airspeed.
So if one does accidentally take off with those giant barn doors hanging down off the wings, what is the "proper" procedure?
My thoughts would be as follows:
1. Oh crap.
2. Airspeed.
3. Retract a little bit
4. Airspeed.
5. Retract a little bit more.
6. Airspeed
7. Eventually you get back to what would be configured for a short field takeoff.
8. Continue as if it was a short field take off for flap retract and airspeed.
I don't know how if you're using the factory 152 checklist you don't SEE the flaps hanging down at "Flight Controls Free and Correct".


It's worse than we thought, at least according to the article.
http://www.abcnews4.com/story/26436...ant-crash-did-not-have-instructor-credentials
http://www.ntsb.gov/aviationquery/brief.aspx?ev_id=20140814X24748&key=1
Yeah I can't imagine too many good things are going to happen to the school because of this.That's not good
Wouldn't the school at least take a look at his tickets before hiring him? Everyplace I've worked, at the very least, made photocopies of my pilot cert, CFI, GI, and medical.
As far as I know Henning, this was a hired CFI working through the school. Only there for about 2 weeks before the accident.
Well I would say that is not going to end well for the school's management. I foresee a beating coming from the government and families.
They've been extremely quiet to reporters. They did start advertising on the radio the week after the accident.
Flaps should be safety wired to the up position on a Cessna 150/2. They never do you any good.
I can just hear hennings and his minions howling in the background. "Oh, the Humanity!" All that extra energy will kill you, when in actuality, the above 150/flap accident scenario has killed scores of people.
I don't know how you could miss the flaps when your doing a control check on a 150![]()
Pretty hard to teach short field landings to students with the flaps selector wired up.
Sent from my iPhone using Tapatalk
Pretty hard to teach short field landings to students with the flaps selector wired up.
I recently made a new checklist for our 150G, since it basically didn't have one of any use when we bought it. I put "Flaps UP" on it at three times in various phases before taking the runway. It's in the after-start, the control check, and taking runway. I did the same thing with the fuel valve, even though it is stuck on.
How did they ever manage in a Taylorcraft, Champ or Cessna 120?
Once again by your logic, no aircraft should have flaps, simply because those didn't.

No, because that's not what I said or implied either.Could you please quote who said that "no aircraft should have flaps"
I've taken off with 40 degrees flaps short field numerous times. You pop off into ground effect.
I don't get it.
Electric flaps shouldn't dump you onto the pavement like that ... obviously the 150 and 180 are worlds apart ...![]()
The 150 will also fly out with flaps 40, at least solo.

I've never flown in a 150, so I'm talking our my arse.
But evidently, if you pick up the flaps with two people, it stalls.![]()
How did they ever manage in a Taylorcraft, Champ or Cessna 120?