Own tail-number on traffic display (Stratux + Avidyne)

[455 Bravo Uniform]

I don’t want to see my own tail-number on my IFD-540 traffic display. I am feeding it from my Stratux ADS-B In. To fix this I think I need to correct it in the Statux, right? IFD is just displaying whatever Stratux is putting out?

 

[AV8R_87]

To fix this I think I need to correct it in the Statux, right?

Yes.

Under Stratux settings, there is a field where you can enter your aircraft's Mode S ID. That allows it to filter it out.

Don't have a Stratux handy right now, but if you can't find the setting I should be able to take a few screenshots tomorrow.

 

[455 Bravo Uniform]

Yes.

Under Stratux settings, there is a field where you can enter your aircraft's Mode S ID. That allows it to filter it out.

Don't have a Stratux handy right now, but if you can't find the setting I should be able to take a few screenshots tomorrow.

Thank you. This should help me get started, don’t trouble with screenshots; I appreciate it!

 

[455 Bravo Uniform]

It worked, thanks @AV8R_87

This is what I did:
-Turn Stratux on
-Connect to its WIFI with your phone/tablet/laptop.
-Open browser and enter 192.168.10.1
-Use left menu and select Settings
-Go to Traffic Settings/Ownship Supress
-In Ownship Mode S or Ignore Mode S enter your tail number in HEX (go to FAA website to find the HEX conversion)
-Save
-Reboot