Looking for an avionics tech in central NJ

[Ted Ricci]

In central NJ looking for an avionics tech/IA to complete a panel upgrade on my 172 onsite in my hangar. This job was started by another tech more than 6 months ago and has been stalled out for awhile now. The plane is apart and cannot be flown anywhere so my hangar is it.

Any suggestions are appreciated.

 

[AlleyCat67]

I used Princeton a couple of years ago and was satisfied. I had to take it back once to get them to correctly configure the glideslope signal to the G5, but otherwise all good.

 

[ExpressJetter]

I had some avionics installed by Adventures aviation in solberg. Andrew is the owner and has taken care of me

 

[Ted Ricci]

Still looking. My plane can't be moved in the condition it's in so I need someone who can come in and work on it.

TIA

 

[Bell206]

Still looking.

Depending on how much of that previous work is signed off you might be rather limited in your options. Is your problem a lack of local talent or no local interest to finish the job?

 

[Ted Ricci]

Depending on how much of that previous work is signed off you might be rather limited in your options. Is your problem a lack of local talent or no local interest to finish the job?

None of the other work is signed off. The tech has been MIA.

 

[wheaties]

Can you get someone to rig up a steam gage alt, speed and a ferry permit? Those pictures say "this should be at a shop." You're going to have a hard time finding someone to spend that much time at your airfield in your hangar given the work backlogs all the shops are facing here.