skyflyer8
Line Up and Wait
- Joined
- Nov 27, 2006
- Messages
- 967
- Display Name
Display name:
skyflyr
There are ATC feeds for the runways @ OSH and hopefully soon Fisk online at http://www.liveatc.net.
FISK approach is finally up! http://d.liveatc.net/kosh.m3u
Fisk approach is "up", but you can only hear the aircraft, not the controllers.
Jim
That's why it's really quiet.Hmmm... I though that the aircraft were not supposed to... ummmm... talk?
I'm just getting continous buffering...
Is it my settings?
No dice - page cannot be found.
I can hear one of the two feeds on the main site but I don't hear anything on FISK. Main site has ATC sequencing, assigning colored dots and telling planes where to turn off.
Surprisingly, the location of that feed is about two miles from the field, but the FISK approach transmitters may be located off site somewhere further away, so we're not able to pick up any controllers. We'll have to look into where those are for next year's AirVenture.
Surprisingly, the location of that feed is about two miles from the field, but the FISK approach transmitters may be located off site somewhere further away, so we're not able to pick up any controllers. We'll have to look into where those are for next year's AirVenture.
The 120.7 antennas are in fact at the FAA trailer at Fisk. If you just punch "Fisk, WI" into google maps, the pin ends up pretty much right where the trailer is (County FF, just north of 44). Fisk Ave is the "east-west road" used for the approach to 36L/R, and the trailer is on the top of a small hill just north of the railroad tracks.
The 120.7 antennas are in fact at the FAA trailer at Fisk. If you just punch "Fisk, WI" into google maps, the pin ends up pretty much right where the trailer is (County FF, just north of 44). Fisk Ave is the "east-west road" used for the approach to 36L/R, and the trailer is on the top of a small hill just north of the railroad tracks.
Jim, your post reminds me of a Kitplanes article I read a while back on how to make an antenna for ground ops, any relation to the author?
Did you replace /mountpoint with the mountpoint for the feed? Ie, http://alt.liveatc.net/kosh2
Um, yeah, I know the author of that article fairly well
Jim
I thought so...Thanks again, my "WeirdJim" antenna is working well.
Tim
I built the one from the June 07 issue. 1" PVC cap with a UG-1094 BNC and 5 pieces of brazing rod.
Tim
Aw, cmon, Jim...pick a design and stick to it!Make that FOUR ground station antenna articles
Aw, cmon, Jim...pick a design and stick to it!
SHHHH! DHS just added your name to the no-fly list.
Wow. Those guys are GOOD.
Good thing I'm not planning to fly into OSH itself this year...I'm not good enough yet.
.
.
So, DHS - Do me a favor. Put me on the no fly list.
.
.
Glad you like it! A big thanks to the volunteers for helping us out and making it a reality.
Sure, Jim! Send it to tech<at>liveatc.net so Dave and I both get it.
Thanks!