Lightspeed Zulu 1 DIY repair

pburger

Pre-takeoff checklist
Joined
May 26, 2007
Messages
489
Location
Houston, TX
Display Name
Paul B.
Home Airfield
TS07
I have a Lightspeed Zulu 1 headset that was sent back to Lightspeed eight years ago. For $100 they replaced the cords and I think they gave me a new battery box. When I inquired about service, they told me they no longer service the Zulu 1 at all. A little research led me to the fact that the Zulu 1, 2, and 3 all share the same cords and connectors. I found replacement cords on Ali Express for about $25 or so each for the two cords needed. These cords have connectors on them and come with the grommets. The swap out took about 10 minutes total start to finish. My Zulu 1 is now back in business and has the newer Zulu 3 style cords.

Zulu 1 with new cords:

2025-06-28_11-47-11_514.jpeg

old cord:
2025-06-28_11-47-59_954.jpeg
 
You're gonna love the new cord. Virtually tangle free with the new coating.
 
You're gonna love the new cord. Virtually tangle free with the new coating.
Yep. I already got the new cord on my Zulu 2 when I upgraded it to a Zulu 3 for $400. Heck, if I'd know about these cords I probably would've just DIY'd that one, too.
 
Great, I ordered ali express cables also on the Zulu arriving any day, after speaking with Allen the outgoing CEO on right to repair they send me a care package have not opened it yet. I am still going to hold them to the right to repair on modern stuff 2015 and newer. Service Manuals, Schematics, Parts, and Firmware.


Here is a Teardown of the Zulu control box I plan to back up the firmware.

Now if only we could source earseals for the Thirty 3G
 
... A little research led me to the fact that the Zulu 1, 2, and 3 all share the same cords and connectors. I found replacement cords on Ali Express for about $25 or so each for the two cords needed. These cords have connectors on them and come with the grommets. The swap out took about 10 minutes total start to finish. My Zulu 1 is now back in business and has the newer Zulu 3 style cords.
Is this the cord?
 
Based on my experience with the industry, you're likely buying cables going out the backdoor of the factory making them for Lightspeed. Some people are ok with that, some aren't. Just FYI.
 
I have a Lightspeed Zulu 1 headset that was sent back to Lightspeed eight years ago. For $100 they replaced the cords and I think they gave me a new battery box. When I inquired about service, they told me they no longer service the Zulu 1 at all. A little research led me to the fact that the Zulu 1, 2, and 3 all share the same cords and connectors. I found replacement cords on Ali Express for about $25 or so each for the two cords needed. These cords have connectors on them and come with the grommets. The swap out took about 10 minutes total start to finish. My Zulu 1 is now back in business and has the newer Zulu 3 style cords.

Zulu 1 with new cords:

View attachment 142494

old cord:
View attachment 142493
How difficult was getting access to the connectors in the battery box?
 
How difficult was getting access to the connectors in the battery box?
Not that difficult... Just a few small screws. I did a Teardown above so people can see the insides of the Zulu.

I received my ali express down cable
Lightspeed-Zulu-3-Down-Cable-Ali-expres-768x432.jpg


Here is the connector this is at the control box. I have not cracked open the ear cup yet.
The original Zulu 1 has gold contacts the China Zulu 3 ali express cable has Tin anyone have a original Zulu 3 Cable to compare?
Lightspeed-Zulu-Original-and-3-Down-Cable-Strain-Relief-and-Connector-Ali-express-768x775.jpg

I Plan to do a Live Stream of the Reassembly once the other cable comes in.
 
Based on my experience with the industry, you're likely buying cables going out the backdoor of the factory making them for Lightspeed. Some people are ok with that, some aren't. Just FYI.
I hear ya. Lightspeed would not sell these to me for my Zulu 1. I was prepared to pay Lightspeed a couple of hundred bucks, but they refused to service my Zulu 1. So, when I found these cables I had NO PROBLEM WHATSOEVER buying them for my Zulu 1.
 
I hear ya. Lightspeed would not sell these to me for my Zulu 1. I was prepared to pay Lightspeed a couple of hundred bucks, but they refused to service my Zulu 1.
That's their right, isn't it?
So, when I found these cables I had NO PROBLEM WHATSOEVER buying them for my Zulu 1.
If that works for you, great. I'm just letting you know that it isn't a coincidence that these look exactly like the LS cables, down to the LS markings and work with your headset.
 


I ordered the cable from the link provided by pburger and only received the lower cable with the plugs. I went back to the AliExpress link and after sleuthing around for several minutes figured it out. AliExpress sale site is NOT intuitive!
To the lower right of the big picture there are two boxes showing cables with a title to select "Color: Cable B 0.6M".
Select the "Add to Cart" button then click the other box of the two cables. The title above the box now shows "Color: Cable A 1.2M". Add this cable to your cart and now you can check out with both the A and B cables.
Hope this helps to prevent frustration when anyone goes to replace their LightSpeed cables.
 

Lindberg, No not really. Not with the current Right to Repair laws being passed. My experience is lightpseed knows the Zulu 3 cables will fit the Zulu 1 but refuses to sell them fair and reasonable terms. They are aware of Right to Repair just refuse to comply. https://www.lightspeedaviation.com/other-policies​

​

I actually helped get the Oregon and Washington Right to Repair law passed and helped lobby for the Aviation Electronics Exemption to be withdrawn in Washington.​

My understanding is the AG and Courts will say if they wanted it exempt they would have put it in the law not pull it during legislation.​


Testified a few times.. Over the Years

And was Present at the bill signing with the governor.
 

Lindberg, No not really. Not with the current Right to Repair laws being passed. My experience is lightpseed knows the Zulu 3 cables will fit the Zulu 1 but refuses to sell them fair and reasonable terms. They are aware of Right to Repair just refuse to comply. https://www.lightspeedaviation.com/other-policies​

​

I actually helped get the Oregon and Washington Right to Repair law passed and helped lobby for the Aviation Electronics Exemption to be withdrawn in Washington.​

My understanding is the AG and Courts will say if they wanted it exempt they would have put it in the law not pull it during legislation.​


Testified a few times.. Over the Years

And was Present at the bill signing with the governor.
No, not really what? Lightspeed certainly had not sold and does not service Zulu 1s since that law was passed, so it's irrelevant. Regardless, even if Lightspeed was violating that law, it wouldn't justify theft in my mind.
 

@Lindberg Theft? No one is talking about theft!​


Your state of Texas also passed a Right to Repair law HB 2963 and was recently signed in to law by your governor it is not as strong or broad as the laws in Minnesota, Oregon, California and Washington but it's a start.

When the law says a Company must make Repair Documents (Service Manuals, schematics, Parts List), Tools (Firmware & Calibration Software), and Parts available on fair and reasonable terms; they should make them available. Read the Oregon law yourself! https://olis.oregonlegislature.gov/liz/2024R1/Downloads/MeasureDocument/SB1596/Enrolled
​

Yes, I know the Zulu 1's are older then Oregon July 01 2015 Cut off date but a company that is repair friendly would make the info available. Vs. the attitude not until a law make us. Anyways, Lightspeed knows the Zulu 3 cables will fit and they just refuse to sell them and try and force an upgrade. I tried and they would not sell a set of cables or make schematics available. I am sure many others here have tried to get cables also.

I am curious if these ali express cables are from the same manufacture Lightspeed is using in china to make their headsets.

Lightpseed should be receiving a letter from Minnesota, Oregon, & California attorney general's offices some time in August/September. Oregon at the moment is just sending warning letters informing companies of the law and require a reply that can and will be used against them, the Oregon DOJ can not enforce it till July 2027 but they are making a list. This process puts the company on notice and makes them Reasonably Aware. There is an Avenue for private right of action on OR and as a Third Party Electronics Repair Shop I am activity exploring the options.​

CA and MN are enforcing their laws with hefty fines.​


Here is a sample letter that was sent to another company.
Cami-Research-Cableeye-Oregon-DOJ-Letter-On-Right-to-Repair-Complaint-to-Cami-1-scaled.jpg

I am also sure if they released the schematics people will find out that Lightspeed Zulu V1 - 3 are only cosmetic changes and nothing major in parts or technology other than changing the end of life components to something available or it could be something worse such as possible patent infringement because they are hiring Chinese companies to design make the electronics.

I Know for a fact the Blutooth Module a Cambridge Silicon Radio Bluecore 3 BC352239A in the 1 and the CSR 57E6 in the Zulu 3's are bottom of the barrel used in sub $35-$50 ANR Gaming Headsets. I Have not ID'd the Drivers/Microphones yet but lets assume they are prob some low cost china parts also.

By a company making the min required documents available Schematics and BOM A consumer can be informed on the quality of product they are buying and make sure it has the technology they are paying for!

SCHEMATIC'S OR DIE!!!​







​

 

@Lindberg Theft? No one is talking about theft!​

On the contrary. I'd bet a bunch of money that these cables were at best manufactured using Lightspeed's IP (drawings, schematics, molds, etc.) without permission. Likely they were manufactured by someone with an obligation to keep that IP confidential, and to only manufacture for Lightspeed. It's also possible that these cables actually were manufactured for Lightspeed and "fell off the truck."

I have dealt professionally with all these scenarios.

I call that theft. Do you have a different word for it?

Yes, I know the Zulu 1's are older then Oregon July 01 2015 Cut off date but a company that is repair friendly would make the info available. Vs. the attitude not until a law make us.​

Why are we discussing a law that we agree doesn't apply?

I've had headsets repaired and upgraded by Lightspeed. I found their charges to be quite reasonable compared to the headset cost.
 

@Lindberg You seem to misunderstand the core purpose and intent of Right to Repair. It’s about ending manufacturers monopolies on parts and repairs that force consumers to buy new products or prevent them from repairing their devices, whether on their own or through a repair provider of their choice.​

​

Since I have posted my blog and videos on lightspeed I have been contacted and listned to stories from people being denied warranty repairs on zulu 3's and sierra's (User / Liquid Damage) and all Lightspeed did was pressure them in to expensive repair or trading in / upgrading vs replacing a $1.00 failed op-amp on or other component that costs pennies on the board. Having schematics helps keep repair costs down so an owner or tech don't need to reverse engineer the dam thing to diagnose it.​

​

I will never buy another new Lightspeed headset after seeing how they Disintegrated and opening mine up seeing the build quality and parts used.​


We are discussing cables, as with a circuit board I don't believe you can copyright a cable maybe just the artwork and logo because in general functional aspects of a circuit are not copyrightable. I don't see any patents for lightspeed on the braided cables.​

​

From looking at the patents we now know the zulu cable connectors are Molex 53780/51146 Series 1.25mm Pitch PanelMate Connectors so if someone wanted to 3d print a strain relief out of something like TPU they could make their own replacement cable.​

​

Regardless, Lightspeed should be making the cables and other parts available for the Zulu 3 and other headsets on fair and reasonable terms as the Zulu 3 and other headsets are covered under the law. It is not for Lightspeed to dictate how a part is used if purchased or if the person installing is even skilled enough to do so.​

​

I will be ordering another set of china cables and hooking the cables up to my tester and I will post the test results and wiring diagram. This fall I may even have access to a zulu 3 that I'll be able to compare them to.​

​

Looking at some lightpseeds patents. Sometimes one can get basic schematics and block diagrams generally proof of concept helpful in the repair world if they are legible.​


8320591 (Expired ANR Headset) "Maybe Zulu 1/2"
20040136522 (Expired Headset Aux Jack)

10764668 (Active Sensor)​

9837066 (Active Adaptive ANR)​

729764 (Active Earbud)​

10701470 (Active Biometric Sensor)​

6704428 (Expired)​

7215766 (Expired)​

8437812​

​

​

​

​

 
It appears Lightspeed is going to take my advice and use repair as marketing angle and they have started to rollout lightspeed repair info.

Schematics or Die!!! Though it is a start. Lets see how it Evolves!

But lets hope its not Malicious Compliance make a manual with no actual repair info and call it a repair manual.

Screenshot 2025-07-18 at 13-05-55 Other Policies - Lightspeed Aviation.png
 
Based on my experience with the industry, you're likely buying cables going out the backdoor of the factory making them for Lightspeed.
My bold predictions:
* Lightspeed will continue to buy the cables through the front door of the same factory for $1 apiece, sell them for $30, and people will complain because GoUgINg, and/or
* Lightspeed will sell like 4 cables in total and have to raise headset prices to cover the costs of regulatory compliance, and people will complain because they have never ever seen this behavior before.

Schematics or Die!!!

I wonder if there is Lightspeed IP on those EEPROMs or if they're just some COTS thing they bought?

Anyway, what a breath of fresh air to have a nerd jihad thread that is not mac vs pc^W^W^Wandroid vs ios! :biggrin:

citizen-kane-orson-welles.gif
 
@GeorgeC these headsets are actually really dumb ANR not much processing going on the original zulu.

Right to Repair also empowers consumers to see through the marketing hype behind so-called “new” devices with flashy features and buzzwords.

Manufacturers often claim: “It’s new! It’s improved! Trust us!”
But what really changed? Maybe a new color, a slightly different shape, a longer cord, slightly larger display, Updated firmware?

Real Life, Behind the scenes, it’s often just a redesign triggered by obsolete components like a discontinued bargin basement wong hong low brand Bluetooth modules or a manufacture's engineer (Chineese Contractors) ignoring a datasheet that was marked End of Life "Not Recommended for New Designs." so The engineers swap in new parts, adjust the PCB layout, and repackage the same old tech and call it somthing new.

Sometimes the “special technology” being promoted is just a generic circuit based on an expired patent wrapped in a fresh coat of branding, or just a firmware change and sold as cutting edge innovation.

Example: Front Row Center (FRC), stereo cross-feed technology (AKA Possibly, Bass Boost or Built in EQ preset?)

Without strong Right to Repair laws, consumers are left in the dark. With it, they gain the ability to look inside, "See Schematics" compare, and decide for themselves whether it’s truly new, innovative, or just a clever marketing money grab.
 
@GeorgeC these headsets are actually really dumb ANR not much processing going on the original zulu.

Right to Repair also empowers consumers to see through the marketing hype behind so-called “new” devices with flashy features and buzzwords.

Manufacturers often claim: “It’s new! It’s improved! Trust us!”
But what really changed? Maybe a new color, a slightly different shape, a longer cord, slightly larger display, Updated firmware?

Real Life, Behind the scenes, it’s often just a redesign triggered by obsolete components like a discontinued bargin basement wong hong low brand Bluetooth modules or a manufacture's engineer (Chineese Contractors) ignoring a datasheet that was marked End of Life "Not Recommended for New Designs." so The engineers swap in new parts, adjust the PCB layout, and repackage the same old tech and call it somthing new.

Sometimes the “special technology” being promoted is just a generic circuit based on an expired patent wrapped in a fresh coat of branding, or just a firmware change and sold as cutting edge innovation.

Example: Front Row Center (FRC), stereo cross-feed technology (AKA Possibly, Bass Boost or Built in EQ preset?)

Without strong Right to Repair laws, consumers are left in the dark. With it, they gain the ability to look inside, "See Schematics" compare, and decide for themselves whether it’s truly new, innovative, or just a clever marketing money grab.
Dude. If it's useful to you, buy it. If it's not, don't. If you can build it yourself, go ahead.
 
@Lindberg

If you're fine living in a disposable economy and being manipulated by manufactures into constantly buying overpriced replacements, that's your choice. But if something I own breaks, I should have the right to fix it. That means having access to the documents, tools, and parts not being locked/priced out by the manufacturer or be forced to go to them for a repair.

What so wrong about property ownership rights? These Right to Repair laws help protect consumer rights!
 
On the contrary. I'd bet a bunch of money that these cables were at best manufactured using Lightspeed's IP (drawings, schematics, molds, etc.) without permission. Likely they were manufactured by someone with an obligation to keep that IP confidential, and to only manufacture for Lightspeed. It's also possible that these cables actually were manufactured for Lightspeed and "fell off the truck."

I have dealt professionally with all these scenarios.

I call that theft. Do you have a different word for it?
What you are saying is speculative. You could make that bet and easily lose. Further, with these cables originating in China, jurisdictional issues and incongruous legal systems apply. If a US company chooses to do business with a Chinese company (to cut costs) and suddenly finds its "proprietary" tech has been duplicated and is being sold outside of license, that was a foreseeable risk. Chinese companies have been doing this for decades, often completely within the laws of the Chinese government to which they are subject.
I've had headsets repaired and upgraded by Lightspeed. I found their charges to be quite reasonable compared to the headset cost.
Sure, the same way a $500 v-band clamp is "reasonable" compared to the cost of an entirely new turbo assembly.

Fortunately for the v-band clamp company, their component is FAA regulated and subject an AD, so they get to legally engage in predatory pricing.

Unfortunately for Lightspeed, headsets are not FAA regulated, and it is not the legal responsibility of a US consumer to verify the pedigree of a product as long as that consumer is buying in good faith without reason/knowledge to believe they are purchasing a stolen product.
 
That's their right, isn't it?

If that works for you, great. I'm just letting you know that it isn't a coincidence that these look exactly like the LS cables, down to the LS markings and work with your headset.
The cables in the pictures in the post below look similar, but not the same. I don't see LS markings on them.
Not that difficult... Just a few small screws. I did a Teardown above so people can see the insides of the Zulu.

I received my ali express down cable
Lightspeed-Zulu-3-Down-Cable-Ali-expres-768x432.jpg


Here is the connector this is at the control box. I have not cracked open the ear cup yet.
The original Zulu 1 has gold contacts the China Zulu 3 ali express cable has Tin anyone have a original Zulu 3 Cable to compare?
Lightspeed-Zulu-Original-and-3-Down-Cable-Strain-Relief-and-Connector-Ali-express-768x775.jpg

I Plan to do a Live Stream of the Reassembly once the other cable comes in.
On the contrary. I'd bet a bunch of money that these cables were at best manufactured using Lightspeed's IP (drawings, schematics, molds, etc.) without permission. Likely they were manufactured by someone with an obligation to keep that IP confidential, and to only manufacture for Lightspeed. It's also possible that these cables actually were manufactured for Lightspeed and "fell off the truck."

I have dealt professionally with all these scenarios.

I call that theft. Do you have a different word for it?

Why are we discussing a law that we agree doesn't apply?

I've had headsets repaired and upgraded by Lightspeed. I found their charges to be quite reasonable compared to the headset cost.
See images in the quoted post above- the stress release look to be from different molds. The plugs look to be standard connectors.
 
The cables in the pictures in the post below look similar, but not the same. I don't see LS markings on them.


See images in the quoted post above- the stress release look to be from different molds. The plugs look to be standard connectors.
You're comparing the gen 1 cable to the gen 3. Have a look at the AliExpress listing and you'll see the markings.
 
You're comparing the gen 1 cable to the gen 3. Have a look at the AliExpress listing and you'll see the markings.
I'm going by the pictures that were posted. If you have better evidence, please share it (links to both items, or better yet, pictures). I'm submitting a manuscript right now and I'm not going to make my readers do a literature search. You are asserting something, please support your assertion.
 
I'm going by the pictures that were posted. If you have better evidence, please share it (links to both items, or better yet, pictures). I'm submitting a manuscript right now and I'm not going to make my readers do a literature search. You are asserting something, please support your assertion.
Lol. If you look at the caption of the image that YOU referred to, it says clearly that it's a Zulu 1 cable next to a Zulu 3 cable. Feel free to convince yourself of whatever makes you feel good.
 
Lol. If you look at the caption of the image that YOU referred to, it says clearly that it's a Zulu 1 cable next to a Zulu 3 cable. Feel free to convince yourself of whatever makes you feel good.
You still haven't posted proof of your assertion.
 
I have. You chose not to read it.
If so, please link back to it. I didn't "choose not to read it" but simply didn't recognize what you were trying to state as evidence of your assertion. You need only quote it in your reply.
 
Based on my experience with the industry, you're likely buying cables going out the backdoor of the factory making them for Lightspeed. Some people are ok with that, some aren't. Just FYI.
If they want to buy a $25 cable and call it "The NEW ZULU 3!!!" then sell it for $400 because "everyone knows pilots are rich", then I'm 100% fine with them getting back-doored by their own suppliers.

Its a tough world out there; what can I tell you?
 
Any idea if the same can be done for the Sierra?
I would assume the cables Zulu 3 and Sierra cables are the same form the info lightspeed has posted recently the Gen 1 - Zulu 3 and Sierra Cables appear to be the same connector and strain relief pocket in the ear cup and control box.

If I can find the time this Saturday or the Next I will be going to a maker-space to see if some of the 3d modeling students can model up some earseal adapters for the 15K to thirty 3G to accept Zulu ear seals. I may even take the old Zulu, thirty 3G, 15XL and 20k cables and get the strain reliefs done up also. If it happens will make the stl or 3mf files public so people can keep the old headsets working also.

Someone should reach out to Lightspeed to see if they have 3D Models available for the old stuff Probably a firm NO!, but don't hurt to ask!

There has been discussion in a couple states to have 3D Models be part of the Right To Repair as alternative parts compliance method. Amazing what can be done with 3d printers.
 
If so, please link back to it. I didn't "choose not to read it" but simply didn't recognize what you were trying to state as evidence of your assertion. You need only quote it in your reply.
Here's the post with the photo you referred to. Please read the description of the photo.


Here's the post with the link to the AliExpress cables. Note the markings in the photos.

 
Here's the post with the photo you referred to. Please read the description of the photo.


Here's the post with the link to the AliExpress cables. Note the markings in the photos.

Now that was useful, and I now understand what you are saying. It may as you said, but is it possible they are some sort of licensed reseller? I was surprised to see a couple of ultralight aircraft flying around in China when I was there about 3 weeks ago, near the Huangshan area. I truly didn't expect to see anything like that! So there is a market for aircraft headsets in China.

The evidence does allow the possibility that someone in China may be selling Lightspeed out the side door (Alibaba is just the sales conduit, and they will sell anything from anyone, same as Amazon) and I'd be sorely tempted to buy it from Alibaba too, given the Lightspeed markup.
 
Last edited:
@Cap'n Jack GA was growing in china when I was there! But still very restricted.

Lightspeed headsets are made in china.

I was told they don't even design them it's just a name they stick on an existing china product with some customization.

At one time Mooney was owned by China I delivered one of the Demo Aircraft.

IMG_1990.jpg


And Tanked Them Both For the Pacific Crossing..
2-mooneys.jpg

IMG_1925.jpg

Tanks-Front-2.jpg
 
Back
Top