OzPilot
Pre-takeoff checklist
- Joined
- Nov 9, 2006
- Messages
- 174
- Display Name
Display name:
OzPilot
Anyone kept up with these upcoming convention TFR's ?
PHL one below....
http://tfr.faa.gov/save_pages/detail_6_3975.html
http://tfr.faa.gov/save_pages/detail_6_3964.html
They are the same, just different ARTCC for operations I assume.
It appears to be 3mn from 1am to 10am
then expands to 10nm from 10 to 1 am
the 30 nm Area A is in affect at all times, july 25 to 29th
Looking at the below text, it seems out of any 10-30nm airfield that we need a VFR flight plan files and contact ARTCC phone number on ground for XPNDR code first.
If I am flying an aircraft to a maintenance facility and out of the 30nm ring, I imagine my ops will be
1) file a VFR flight plan
2) get a discrete code
2) fly direct and out of the ring. As I am returning within an hour of departure, Would I stay on the same code and reenter the ring? or would i go through the phone call or airborne call again as I would be on a new VFR flight plan? e.g DCT DYL S37 DYL DCT rather than two flight plans of DCT DYL S37 DCT
DCT S37 DYL DCT
As it is a maintenance flight but not a MX testing flight (and I would be outside of the ring, part G doesn't apply.
Thoughts?
Cheers
=======================
A. ALL AIRCRAFT OPERATIONS WITHIN THE 3 OR 10 NMR AREA(S) LISTED ABOVE, KNOWN AS THE INNER CORE(S), ARE PROHIBITED EXCEPT FOR
B. FOR OPERATIONS WITHIN THE AIRSPACE BETWEEN THE 3 OR 10 NMR AND 30 NMR AREA(S) LISTED ABOVE, KNOWN AS THE OUTER RING(S): ALL AIRCRAFT OPERATING WITHIN THE OUTER RING(S) LISTED ABOVE ARE LIMITED TO AIRCRAFT ARRIVING OR DEPARTING LOCAL AIRFIELDS, AND WORKLOAD PERMITTING, ATC MAY AUTHORIZE TRANSIT OPERATIONS. AIRCRAFT MAY NOT LOITER. ALL AIRCRAFT MUST BE ON AN ACTIVE IFR OR VFR FLIGHT PLAN WITH A DISCRETE CODE ASSIGNED BY AN AIR TRAFFIC CONTROL (ATC) FACILITY. AIRCRAFT MUST BE SQUAWKING THE DISCRETE CODE PRIOR TO DEPARTURE AND AT ALL TIMES WHILE IN THE TFR AND MUST REMAIN IN TWO-WAY RADIO COMMUNICATIONS WITH ATC.
G. THE FOLLOWING OPERATIONS ARE NOT AUTHORIZED WITHIN THIS TFR: FLIGHT TRAINING, PRACTICE INSTRUMENT APPROACHES, AEROBATIC FLIGHT, GLIDER OPERATIONS, SEAPLANE OPERATIONS, PARACHUTE OPERATIONS, ULTRALIGHT, HANG GLIDING, BALLOON OPERATIONS, AGRICULTURE/CROP DUSTING, ANIMAL POPULATION CONTROL FLIGHT OPERATIONS, BANNER TOWING OPERATIONS, SIGHTSEEING OPERATIONS, MAINTENANCE TEST FLIGHTS, MODEL AIRCRAFT OPERATIONS, MODEL ROCKETRY, UNMANNED AIRCRAFT SYSTEMS (UAS), AND UTILITY AND PIPELINE SURVEY OPERATIONS.
PHL one below....
http://tfr.faa.gov/save_pages/detail_6_3975.html
http://tfr.faa.gov/save_pages/detail_6_3964.html
They are the same, just different ARTCC for operations I assume.
It appears to be 3mn from 1am to 10am
then expands to 10nm from 10 to 1 am
the 30 nm Area A is in affect at all times, july 25 to 29th
Looking at the below text, it seems out of any 10-30nm airfield that we need a VFR flight plan files and contact ARTCC phone number on ground for XPNDR code first.
If I am flying an aircraft to a maintenance facility and out of the 30nm ring, I imagine my ops will be
1) file a VFR flight plan
2) get a discrete code
2) fly direct and out of the ring. As I am returning within an hour of departure, Would I stay on the same code and reenter the ring? or would i go through the phone call or airborne call again as I would be on a new VFR flight plan? e.g DCT DYL S37 DYL DCT rather than two flight plans of DCT DYL S37 DCT
DCT S37 DYL DCT
As it is a maintenance flight but not a MX testing flight (and I would be outside of the ring, part G doesn't apply.
Thoughts?
Cheers
=======================
A. ALL AIRCRAFT OPERATIONS WITHIN THE 3 OR 10 NMR AREA(S) LISTED ABOVE, KNOWN AS THE INNER CORE(S), ARE PROHIBITED EXCEPT FOR
B. FOR OPERATIONS WITHIN THE AIRSPACE BETWEEN THE 3 OR 10 NMR AND 30 NMR AREA(S) LISTED ABOVE, KNOWN AS THE OUTER RING(S): ALL AIRCRAFT OPERATING WITHIN THE OUTER RING(S) LISTED ABOVE ARE LIMITED TO AIRCRAFT ARRIVING OR DEPARTING LOCAL AIRFIELDS, AND WORKLOAD PERMITTING, ATC MAY AUTHORIZE TRANSIT OPERATIONS. AIRCRAFT MAY NOT LOITER. ALL AIRCRAFT MUST BE ON AN ACTIVE IFR OR VFR FLIGHT PLAN WITH A DISCRETE CODE ASSIGNED BY AN AIR TRAFFIC CONTROL (ATC) FACILITY. AIRCRAFT MUST BE SQUAWKING THE DISCRETE CODE PRIOR TO DEPARTURE AND AT ALL TIMES WHILE IN THE TFR AND MUST REMAIN IN TWO-WAY RADIO COMMUNICATIONS WITH ATC.
G. THE FOLLOWING OPERATIONS ARE NOT AUTHORIZED WITHIN THIS TFR: FLIGHT TRAINING, PRACTICE INSTRUMENT APPROACHES, AEROBATIC FLIGHT, GLIDER OPERATIONS, SEAPLANE OPERATIONS, PARACHUTE OPERATIONS, ULTRALIGHT, HANG GLIDING, BALLOON OPERATIONS, AGRICULTURE/CROP DUSTING, ANIMAL POPULATION CONTROL FLIGHT OPERATIONS, BANNER TOWING OPERATIONS, SIGHTSEEING OPERATIONS, MAINTENANCE TEST FLIGHTS, MODEL AIRCRAFT OPERATIONS, MODEL ROCKETRY, UNMANNED AIRCRAFT SYSTEMS (UAS), AND UTILITY AND PIPELINE SURVEY OPERATIONS.