Fairings wheels

Discussion in 'The Classifieds' started by meglin, May 26, 2016.

  1. meglin

    meglin Pre-Flight

    Joined:
    Jan 17, 2016
    Messages:
    91
    Location:
    Kharkov, Ukraine
    Display Name:

    Display name:
    meglin
    Pants wheels 400*100-150 mm.
    Fiberglass.
    High quality, excellent appearance.
    Price $ 60-100
    There is also a wheel fairings for Cessna airplanes, RVs and Sportstar. They are about half the stronger and a half times better than the original.
     

    Attached Files:

    Last edited: Dec 16, 2016
  2. meglin

    meglin Pre-Flight

    Joined:
    Jan 17, 2016
    Messages:
    91
    Location:
    Kharkov, Ukraine
    Display Name:

    Display name:
    meglin
    Few photos
     

    Attached Files:

  3. meglin

    meglin Pre-Flight

    Joined:
    Jan 17, 2016
    Messages:
    91
    Location:
    Kharkov, Ukraine
    Display Name:

    Display name:
    meglin
    We make wheel pants on Cessna-172.
    The cost of one set - $550 (fiberglass) - 3 pieces (the two main (6.00*6) and one bow (5.00*5)).
    The cost of one set - $900 (Carbon) - 3 pieces (the two main (6.00*6) and one bow (5.00*5)).
    Weight of fiberglass fairing 1300 g (main), 1000 g (the bow).
    The weight of carbon fiber fairing 1000 g (base), 800 g (bow).
    On the fairing has a hatch to swap wheels and interior partitions.

    Production of wheel pants on the RV-6.
    The cost of one set of $440 (fiberglass) - 2 pcs (main wheels 5.00*5)
    The cost of one set of $750 (Carbon) - 2 pcs (main wheels 5.00*5)
    Weight of fiberglass fairing 900 g.
    The weight of carbon fiber fairing 700 g.
    On the fairing has a hatch to swap wheels and interior partitions.

    Composition (base) - certified epoxy for aviation name of Epoxy 619 and the structural fabric of the T-10 (14). The method of vacuum forming and heat setting. They are light and strong, not afraid of blows, falling stones and walked on them. Caulking is not used. Guaranteed operation 3000 thousands of flight (about 5 years of active use) and post-warranty service. Product Data Sheet attached. The passport shows all performance characteristics.
    All fairings are covered with soil and are ready for painting.

    Manufacturing - within 15 working days from the date of payment. Sending at EMS.
    Shipping cost of 1 Kit - $120. Sending is about 7-10 business days.
     
    Last edited: Dec 16, 2016
  4. meglin

    meglin Pre-Flight

    Joined:
    Jan 17, 2016
    Messages:
    91
    Location:
    Kharkov, Ukraine
    Display Name:

    Display name:
    meglin
    More photos:
     

    Attached Files:

  5. labbadabba

    labbadabba Pattern Altitude

    Joined:
    Aug 12, 2014
    Messages:
    1,623
    Location:
    Lawrence, KS
    Display Name:

    Display name:
    labbadabba
    Do wheel pants need a STC?
     
  6. meglin

    meglin Pre-Flight

    Joined:
    Jan 17, 2016
    Messages:
    91
    Location:
    Kharkov, Ukraine
    Display Name:

    Display name:
    meglin
    I do not know. We have them installed during repairs. They are much stronger and lighter.
     
  7. Tom-D

    Tom-D Taxi to Parking

    Joined:
    Feb 23, 2005
    Messages:
    25,963
    Display Name:

    Display name:
    Tom-D
    Is it an after market part?
     
  8. meglin

    meglin Pre-Flight

    Joined:
    Jan 17, 2016
    Messages:
    91
    Location:
    Kharkov, Ukraine
    Display Name:

    Display name:
    meglin
    This production of new products on request.
     

    Attached Files:

  9. labbadabba

    labbadabba Pattern Altitude

    Joined:
    Aug 12, 2014
    Messages:
    1,623
    Location:
    Lawrence, KS
    Display Name:

    Display name:
    labbadabba
    It would appear so. If I read the OP correctly they are custom fabricating wheel pants.
     
  10. flyingron

    flyingron Touchdown! Greaser! PoA Supporter

    Joined:
    Jul 31, 2007
    Messages:
    13,640
    Location:
    Catawba, NC
    Display Name:

    Display name:
    FlyingRon
    Which are arguably illegal to install on the 172. Cessna never made carbon fiber nor fiberglass wheel pants for the 172. There appears to be neither authority to install nor are these legitimately produced aircraft parts.

    The RV6 is fair game however.
     
  11. meglin

    meglin Pre-Flight

    Joined:
    Jan 17, 2016
    Messages:
    91
    Location:
    Kharkov, Ukraine
    Display Name:

    Display name:
    meglin
    Also RV-7 and RV-10.
     

    Attached Files:

  12. Tom-D

    Tom-D Taxi to Parking

    Joined:
    Feb 23, 2005
    Messages:
    25,963
    Display Name:

    Display name:
    Tom-D
    Do you see a PMA? or a FAA stamp on them?
     
  13. Tom-D

    Tom-D Taxi to Parking

    Joined:
    Feb 23, 2005
    Messages:
    25,963
    Display Name:

    Display name:
    Tom-D
    yep..
     
  14. Jimmy cooper

    Jimmy cooper En-Route

    Joined:
    Aug 25, 2013
    Messages:
    4,325
    Location:
    Baltimore md.
    Display Name:

    Display name:
    Jim cooper
    I've owned both a t craft and a champ...both trophy winners, that had fiberglass wheel pants . The t craft s pants were made by the restorer and both sets were perfect and sturdy. Worked great. Never questioned at annuals by any one. I'd put the ones described on a 172 in an instant.
     
  15. meglin

    meglin Pre-Flight

    Joined:
    Jan 17, 2016
    Messages:
    91
    Location:
    Kharkov, Ukraine
    Display Name:

    Display name:
    meglin
    On them you can walk without fear.