b-Kool portable cooling systems Major announcement

Discussion in 'The Classifieds' started by Bob Stephens, Jun 10, 2021.

  1. Bob Stephens

    Bob Stephens Pre-takeoff checklist

    Joined:
    Apr 29, 2012
    Messages:
    166
    Location:
    Arizona
    Display Name:

    Display name:
    Bob Stephens
    Press Release
    For immediate distribution
    McPeck Aviation
    B-Kool Portable Cooling Systems


    Adam McPeckBKoolAdam@gmail.com
    Jordan McPeckBKoolJordan@gmail.com
    Bob Stephens Bob@B-Kool.net

    866-322-0922

    June 9, 2021



    McPeck Aviation is pleased to announce the acquisition of B-Kool Portable Cooling Systems.

    B-Kool, the recognized industry leader in portable cooling solutions, is a perfect complement to McPeck Aviation products. With similar focus on quality products and unrivaled customer service, current and future B-Kool clients will receive the same prompt and courteous care before and after a purchase.

    For information about purchasing a B-Kool portable cooling system, visit B-Kool.net, McPeck Aviation.com, or email Adam or Jordan.
     
  2. GaryMT

    GaryMT Filing Flight Plan

    Joined:
    Jul 20, 2021
    Messages:
    2
    Display Name:

    Display name:
    gmtII
    b-kool.
    I received mine two weeks ago and the pump was detached from bottom of kooler.
    Sent them a email about my problem.

    Upon unpacking the cooler I noticed the sump was loose in the ice chest. there where some blue glue markings on both bottom of ice chest and intake portion of pump.

    There reply

    Gary,
    We had a builder that did not apply enough glue to the pump bases for a short time. If you have a hot glue gun disconnect the pump from the blue base and glue the blue base back down to the roughed up edge of the kooler.
    Gorilla glue works well also. We have a prototype of a bump base that is screw mounted We will be upgrading to in the near future. It will be available separately and all of our previous B-Kools will be able to be upgraded with ease.
    The system will work fine with the pump detached but it needs to be vertical to work properly.
    -Adam

    My reply


    Thanks for the reply.
    From what you are saying "b-kool" knowingly shipped me and others units with known defects.
    I find that unacceptable.
    I never signed on to be part of b-kool quality control department.
    Adam I bought a 24volt unit last year from you. Had a good conversation about 12 volt vs 24 volt systems, you where very helpful.
    You did not sound like a person who would ship out a defective product.
    To say the least, I am so surprised that you shipped these units with known defects. And then tell me how to fix my new broken unit.

    Gary

    Let the buyer beware
     
  3. murphey

    murphey Touchdown! Greaser! PoA Supporter

    Joined:
    Aug 21, 2008
    Messages:
    10,312
    Location:
    Colorado
    Display Name:

    Display name:
    murphey
    Gary

    I bought a B-Kool a number of years ago, and the pump was loose. Things like this happen in transit. Glued it down, been fine ever since.
     
  4. GaryMT

    GaryMT Filing Flight Plan

    Joined:
    Jul 20, 2021
    Messages:
    2
    Display Name:

    Display name:
    gmtII
    Never had any problem with my b-kooler from last year.
    My only issue is/was they where aware of a the glue issue and shipped out the bad ones.
    I have since glued the pump back in place and will keep my fingers crossed.
    And you are correct, ship happens.

    Gary