timwinters
Ejection Handle Pulled
ALUMINUM Hangar Door for Sale, Good condition
Specifications:
Mfgr: Wilson Industrial Doors, Inc
PO Box 246
Franksville, WI 53126
262-732-5042
Nominal Size 44’ x 12’
SN: 082294175
Rough Opening 44’-9” x 14’-6”
Clear height when open = 11’-6”
Door weight, frame only = 1900#
Door weight w/ standard sheathing = 3500#
(door is currently skinned with standard sheathing)
Price New (quote attached): $25,410 + $1,900 freight = $27,310
(price is for door only, no sheathing included)
Asking: $9,500 (sheathing included)
Door is presently installed on a private hangar on a private (former) airstrip in Mount Vernon, MO. Purchaser will be responsible for removing and shipping. I will gladly assist with sketching cable routing and marking cable ends before disassembly.
Each of the two "door panels" break down into two sections horizontally. So, for shipping purposes, the door will break down into four sections approximately 22' x 8'. Doable for a 16' flatbed trailer.
Engineering calculations, operation manual and installation manual are all attached. These docs are all for the new door that I had Wilson quote to determine what this one was worth before I bought it. This door is the same door...but numerous years old...thus design, etc., may vary somewhat from the attached docs.
Specifications:
Mfgr: Wilson Industrial Doors, Inc
PO Box 246
Franksville, WI 53126
262-732-5042
Nominal Size 44’ x 12’
SN: 082294175
Rough Opening 44’-9” x 14’-6”
Clear height when open = 11’-6”
Door weight, frame only = 1900#
Door weight w/ standard sheathing = 3500#
(door is currently skinned with standard sheathing)
Price New (quote attached): $25,410 + $1,900 freight = $27,310
(price is for door only, no sheathing included)
Asking: $9,500 (sheathing included)
Door is presently installed on a private hangar on a private (former) airstrip in Mount Vernon, MO. Purchaser will be responsible for removing and shipping. I will gladly assist with sketching cable routing and marking cable ends before disassembly.
Each of the two "door panels" break down into two sections horizontally. So, for shipping purposes, the door will break down into four sections approximately 22' x 8'. Doable for a 16' flatbed trailer.
Engineering calculations, operation manual and installation manual are all attached. These docs are all for the new door that I had Wilson quote to determine what this one was worth before I bought it. This door is the same door...but numerous years old...thus design, etc., may vary somewhat from the attached docs.
