ADS-B in ???

[Unkljohn]

I have found a plane that I really like, except that it doesn’t have ADS-B in.
Here’s the list of what’s in the panel.
Avionics:
GDU-1044B Primary Flight Display (PFD)
GDU-1044B Multi-function Display (MFD)
GMA-1347 Digital Audio Panel with Marker Beacon/Intercom
Marker Beacon Antenna
GIA-63W NAV/COM/GPS/WAAS with Glideslope #1
GIA-63W NAV/COM/GPS/WAAS with Glideslope #2
GTX-33ES Transponder Mode S with TIS & ADS-B Out Transponder Antenna
GEA-71 Engine/Airframe Computer
• CHT/EGT Sensors - All Cylinders
• Fuel Flow Meter
• Manifold/Tachometer/Vacuum Sensors
GRS-77 AHRS
GDC-74 Air Data Computer with OAT Probe GMU-44 Magnetometer
GFC-700 Autopilot
• Go-Around Switch
• Control Wheel Steering
My question is, how could I get ADS-B IN information displayed on the panel? Thanks in advance for any help.

 

[NordicDave]

With G1000's you need to use whatever the STC/airframe holder says is certified, meaning GTX-345R. Good news there are plenty of people who will want the GTX-33ES to off set costs. With a G1000 absolutely going to want to have ADS-B In for weather & traffic.

 

[asicer]

On top of that, G1000 software differs from airframe to airframe. So if a C172 with a GTX-345R can get FIS-B/TIS-B displayed on the G1000, that doesn't necessarily mean that an AG5B with a GTX-345R can get FIS-B/TIS-B displayed on the G1000.

So, which airframe are we talking about?

 

[Unkljohn]

It’s a Cessna 182T