kontiki
Cleared for Takeoff
- Joined
- May 30, 2011
- Messages
- 1,121
- Display Name
Display name:
Kontiki
I'm looking at repairing a damaged tail cone fairing (ABS plastic) that needs to be fixed on my Grumman Tiger before I can reinstall my tail position light. It just crumbled when I opened it up.
I have a fair amount of wheel fairing (fiberglass) cracks to address sooner or later too.
I've picked through a lot of Google hits, but figured I'd see if anyone had any advice on products they stand by. Any links to good instruction guides would be good too?
I did a lot of non-structural fiberglass work years ago (on L-1011s) and it was all fine, but back then I just used whatever it was the company bought.
There are a lot of products on the market to choose from.
Thanks
I have a fair amount of wheel fairing (fiberglass) cracks to address sooner or later too.
I've picked through a lot of Google hits, but figured I'd see if anyone had any advice on products they stand by. Any links to good instruction guides would be good too?
I did a lot of non-structural fiberglass work years ago (on L-1011s) and it was all fine, but back then I just used whatever it was the company bought.
There are a lot of products on the market to choose from.
Thanks