696 to drive auto pilot

[NJP_MAN]

Does anyone do this? Any issues or things to look out for?

Edit: if it makes a difference it will be driving the Dynon AP74 and using the efis that Dynon has as well

 

[N801BH]

Does anyone do this? Any issues or things to look out for?

Look out for the FAA inspectors......

And the ground too.........

All kidding aside.... It should work...

 

[kyleb]

I use a 695 to drive the Tru-Trak autopilot in my RV-6.

It works flawlessly.

 

[FORANE]

Does anyone do this? Any issues or things to look out for?

Edit: if it makes a difference it will be driving the Dynon AP74 and using the efis that Dynon has as well

I have not wired Dynon but have installed Trio and Trutrak coupling them to 430 and GTN650. One thing to look out for is to make sure you are not feeding the autopilot with the EFIS and the 696 concurrently.

 

[NJP_MAN]

I have not wired Dynon but have installed Trio and Trutrak coupling them to 430 and GTN650. One thing to look out for is to make sure you are not feeding the autopilot with the EFIS and the 696 concurrently.

Thanks for the info. The avionics guy probably knows a out this but he mostly works on big stuff so this might be a valid point to bring up.