Salty
Touchdown! Greaser!
Assuming a naturally aspirated engine. What's a "normal" loss of pressure if the intake filter is clean and everything is working properly. It's obviously going to be "a little" lower than ambient, but I can't seem to find anything on what is a typical "good" number.
My IO-540 seems to be about .9" lower. I have no idea if that's good or bad.
My Savvy report says I'm running higher than my cohorts but being I tend to operate near sea level, I'm not sure that means anything useful
My IO-540 seems to be about .9" lower. I have no idea if that's good or bad.
My Savvy report says I'm running higher than my cohorts but being I tend to operate near sea level, I'm not sure that means anything useful