TruTrak/Aerocruze 100 setup mode

[George Mohr]

Hi all,

Does anyone know how to get the certificated TruTrak into setup mode so the numbers can be tweaked?

Thanks!
G

Edit: for clarity I downloaded the experimental manual but that buttonology didnt work.

 

[Jesse Saint]

It depends slightly on the software version, but for the newer software:
1. Hold the knob in while you power on.
2. Push Alt twice or until “setup enable” is shown.
3. Twist knob to change value to 10.
4. Push Alt & it goes into normal mode.
5. Push and hold Alt to get into vertical settings or Mode to get into lateral settings. You can fly in this mode and get into settings to tweak for best flight performance. It will stay in Setup Enable mode until the unit is powered off.

 

[George Mohr]

Thanks Jesse,

What do you mean by "3. Twist knob to change value to 10." Is that just an example of changing a setting, or actually something you need to do just to enter setup mode?

 

[Jesse Saint]

It’ll make sense when you get there. It says “setup enable 0”. Twist to “setup enable 10”.

 

[George Mohr]

It’ll make sense when you get there. It says “setup enable 0”. Twist to “setup enable 10”.

Thanks!!!