Touch-up

[skylanerg]

I have a small can of Imron to touch up the nicks and scratches. I'm trying to keep our hangared plane as close to 10 as possible.

Q: Between coats (with artists' brush) is it best to use wet/dry? What grade? Any special prep between coats? Time between coats (on Long Island, we keep hangar at 50* at night, 68* while working)?

Thank you

Steven

 

[Tom-D]

I have a small can of Imron to touch up the nicks and scratches. I'm trying to keep our hangared plane as close to 10 as possible.

Q: Between coats (with artists' brush) is it best to use wet/dry? What grade? Any special prep between coats? Time between coats (on Long Island, we keep hangar at 50* at night, 68* while working)?

Thank you

Steven

chips and scratches,,,,, do not sand,,,,, fill the crack with paint, allow to dry/cure, and then sand smooth with 1500 grit wet and dry paper and buff to a high gloss. the scratch will disappear.