sceet/scat sizing

Discussion in 'Maintenance Bay' started by Let'sgoflying!, Nov 10, 2018 at 5:02 PM.

  1. Let'sgoflying!

    Let'sgoflying! Touchdown! Greaser!

    Joined:
    Feb 23, 2005
    Messages:
    15,934
    Location:
    west Texas
    Display Name:

    Display name:
    Dave Taylor
    3” OD flange

    Do I need
    3” flexible tubing or
    3 & 1/4” ?
     
  2. nrpetersen

    nrpetersen Pre-takeoff checklist

    Joined:
    Jan 4, 2013
    Messages:
    383
    Location:
    Minnetonka MN
    Display Name:

    Display name:
    nrpetersen
    3" - there is a slight extra. Checked via measure on a sample.
     
    Let'sgoflying! likes this.
  3. AggieMike88

    AggieMike88 Touchdown! Greaser!

    Joined:
    Jan 13, 2010
    Messages:
    15,564
    Location:
    Denton, TX
    Display Name:

    Display name:
    Now offering reverse discounts.
  4. AggieMike88

    AggieMike88 Touchdown! Greaser!

    Joined:
    Jan 13, 2010
    Messages:
    15,564
    Location:
    Denton, TX
    Display Name:

    Display name:
    Now offering reverse discounts.
    For a few moments, I thought this was going to be a thread about Cab Calloway, Louis Armstrong, and Ella Fitzgerald
     
    Lachlan likes this.
  5. Let'sgoflying!

    Let'sgoflying! Touchdown! Greaser!

    Joined:
    Feb 23, 2005
    Messages:
    15,934
    Location:
    west Texas
    Display Name:

    Display name:
    Dave Taylor
    mike does that vid cover sizing? (8 mins long)
     
  6. AggieMike88

    AggieMike88 Touchdown! Greaser!

    Joined:
    Jan 13, 2010
    Messages:
    15,564
    Location:
    Denton, TX
    Display Name:

    Display name:
    Now offering reverse discounts.
    Just searched... didn't view..
     
  7. GRG55

    GRG55 Final Approach

    Joined:
    Dec 29, 2015
    Messages:
    5,259
    Display Name:

    Display name:
    Aztec Flyer
    For a few moments I thought this was going to be a thread about shooting clay targets and estimating the size of the bear you are tracking...:)