Rotax TBO upgrade.

[bluesideup]

Hi everyone.
Does anyone know where I can find some information about the possibility of upgrading an engine from 1500 to 200Hrs, and what it would take to do it?
I think the engine was manufactured in 2007 at the beginning of the year, SN 5 648 438
Thank you.

 

[Gary Austin]

First thing that comes to mind is Lockwood, Sebring, FL., they have helped me out a bunch of times with Rotax engines, good luck, wish you the best on that

 

[Capt. Geoffrey Thorpe]

https://legacy.rotaxowner.com/si_tb_info/serviceb/sb-912-057.pdf

 

[bluesideup]

Hi.
Thank you, for the feedback.
By looking at the SB it would imply that any engine above the SN 4,923.890, need no modifications / should be a 2000hrs?
Am I missing something?

 

[Kenny Phillips]

Hi.
Thank you, for the feedback.
By looking at the SB it would imply that any engine above the SN 4,923.890, need no modifications / should be a 2000hrs?
Am I missing something?

Has the 1,000 hour "special check" been performed? And from time to time, a manufacturer will alter the TBO, based on field experience.

 

[bluesideup]

Hi.
As far as I know the engine is below 1000.00Hrs, but I am not sure if it followed the 100hr. or any other protocol that Rotax requires, but it is not very clear what they actually want / need.
The SB does not mention anything about the SNs above 4,923.890.

Has the 1,000 hour "special check" been performed? And from time to time, a manufacturer will alter the TBO, based on field experience.