David Augspurger
Filing Flight Plan
- Joined
- Oct 22, 2017
- Messages
- 26
- Display Name
Display name:
Dirtracer35
Replacing the old dead kln94 with a gps175. I am using a ksc525a with an IRU525 on the back of it.
Most of the pinout seems pretty strait forward except the connections for the OBS
On the kln94 I Have OBS out, sin, cos and return.
On the GPS 175 I have Rotor H Gnd,Rotor C, Stator G Gnd, Stator F, Stator D, and Stator E Gnd.
I assume that all the grounds are common so I would connect return pin from the KLN94 to ground
Maybe rotor C is OBS out, But I don't know which connection is sin and cos. If any of the experts have this info I would appreciate the help.
Thanks
David
Most of the pinout seems pretty strait forward except the connections for the OBS
On the kln94 I Have OBS out, sin, cos and return.
On the GPS 175 I have Rotor H Gnd,Rotor C, Stator G Gnd, Stator F, Stator D, and Stator E Gnd.
I assume that all the grounds are common so I would connect return pin from the KLN94 to ground
Maybe rotor C is OBS out, But I don't know which connection is sin and cos. If any of the experts have this info I would appreciate the help.
Thanks
David