Rear Mic Input

jetedrick

Pre-takeoff checklist
Joined
Aug 8, 2013
Messages
105
Location
Omaha, NE
Display Name

Display name:
JT
How hard is it to install mic inputs for the rear seat in a Piper PA28-140?

Just curious, saw a Flite-Liner with a rear seat and a 160hp engine but no rear mic inputs (don't think these came with rear seats stock).
 
How hard is it to install mic inputs for the rear seat in a Piper PA28-140?

Just curious, saw a Flite-Liner with a rear seat and a 160hp engine but no rear mic inputs (don't think these came with rear seats stock).

If you know how to do it, it is trivial. If you don't, Extremely Difficult.
 
(Chuckle).

If you have to ask, then the answer is: "Very simple, just call your favorite avionics tech."

Joking aside, you'll run two wires to each location, each at least three conductors (two plus shield/ground), which will be soldered to the jacks. At the panel end, of course, you'll bpneed an intercom system to which the wires re to e connected...
 
Simple as all hell, you buy a portable intercom and place it between the seats.
 
Back
Top