murphey
Touchdown! Greaser!
RC22-7 AI. Overhauled in 2007, been working just fine ever since. Removed for a G5 this week. Got the fittings attached, but you can removed them if needed. Going for $400 and up on eBay (used) and $900 and up (new).
$350 or make an offer.
Here's the marketing stuff:
The RCA22 Series of vacuum artificial horizon are controlled by air driven precision gyros to present the pilot with pitch and roll information. The attractive color scheme of blue sky and brown ground presents a realistic spherical display of flight. The RCA22-7 has a dark blue/brown display, fixed pointer, and is unlighted.
All R.C. Allen vacuum gyros run off of 4.5 inch Hg, erect time is 3 min. The instrument fits in a standard 3 1/8 panel cutout. A ¼ -18 NPTF nylon tube slip fitting is recommended for vacuum hose installation. A 1/8 – 27 NPTF nylon tube slip fitting is recommended for vacuum gauge installation.
Height: 3-3/8"
Width: 3-3/8"
Length: 6"
Weight: 2.75 lbs.
Meets or exceeds all requirements of FAA TSO C4c and Aeronautical Standard AS396B.
Made in the USA
$350 or make an offer.
Here's the marketing stuff:
The RCA22 Series of vacuum artificial horizon are controlled by air driven precision gyros to present the pilot with pitch and roll information. The attractive color scheme of blue sky and brown ground presents a realistic spherical display of flight. The RCA22-7 has a dark blue/brown display, fixed pointer, and is unlighted.
All R.C. Allen vacuum gyros run off of 4.5 inch Hg, erect time is 3 min. The instrument fits in a standard 3 1/8 panel cutout. A ¼ -18 NPTF nylon tube slip fitting is recommended for vacuum hose installation. A 1/8 – 27 NPTF nylon tube slip fitting is recommended for vacuum gauge installation.
Height: 3-3/8"
Width: 3-3/8"
Length: 6"
Weight: 2.75 lbs.
Meets or exceeds all requirements of FAA TSO C4c and Aeronautical Standard AS396B.
Made in the USA