Problems wit AeroCruze 100 install (lack thereof)

[Jesse Saint]

Hey RTK, I have a Garmin 430W and I have it connected to a TruTrak 100, and 2 AV-30C's. When I go to CHNL1, my TruTrak works, but my AV30C's do not receive a signal. Then when I use CHNL2 with Aviation, NO ALT, my AV30C's work, but my TruTrak 100 does not receive a signal. I've tried multiple hookups, but no luck. Do you have any idea what I'm missing? The baud rates are 9600 on all instruments, and the correct pins are being used from the 430W. It appears that I need to splice the wiring together from the 430W and connect from the same CHNL. My friend has a Garmin 650 and his works just fine.

The AV-30 and Aerocruze should all use the Aviation format, so all should be connected to the same output on the 430W. Only the Avidyne IFD can output Aviation on more than 1 port at a time.

 

[ktup-flyer]

The AV-30 and Aerocruze should all use the Aviation format, so all should be connected to the same output on the 430W. Only the Avidyne IFD can output Aviation on more than 1 port at a time.

I went through the same thing. This works