Piper Cherokee Interior Door Handle Trim Removal

P51P28

Pre-takeoff checklist
Joined
Sep 9, 2019
Messages
115
Display Name

Display name:
ZD
Hi all. What is the procedure for taking this piece of plastic off around the door handle? Don’t wanna snap the plastic and cracking it. Any tips? Thanks a lot

24BE751F-E157-4A91-BE05-62F45104E21A.jpeg
 
I have the same kind of handle in my '69 Arrow and have been told (not verified!) that if you pull the latch all the way open there is a set screw that becomes visible which, when un-screwed, lets the entire handle come out of the door. I am planning an interior re-do this summer and that issue had me stymied but the Piper Owners forum provided that info. Please post when you have been successful!!
 
Thanks for the input Jim. We didn't end up seeing a set screw after all. Upon further research we found the door handle to be very similar to the ones put in a VW Karmann Ghia/Bug. We slightly heated up the plastic, stuck a flat head screwdriver in, and slowly worked out the black plastic back plate. Once the plate was off, a screw appeared that held the rest of handle trim to the panel. After the screw was removed, the rest of silver trim came off and then, the door panel. The pictures explain it all. We initially thought the thing just snapped off but we didn't want to make any "get the thing off as fast we can" decisions to crack the plastic.

imageedit_6_6514056061.jpg

imageedit_3_4058812768.jpg

imageedit_1_9053509736.jpg

imageedit_4_7583918488.jpg
 

Attachments

  • imageedit_3_6340114212.jpg
    imageedit_3_6340114212.jpg
    320.3 KB · Views: 3
You're welcome sir. Always take as many pictures as you can is our motto
 
Back
Top