L3 Lynx Problem

Discussion in 'Avionics and Upgrades' started by Skymac, Mar 27, 2021.

  1. Skymac

    Skymac Pre-takeoff checklist

    Joined:
    Nov 9, 2015
    Messages:
    120
    Location:
    Kentucky
    Display Name:

    Display name:
    Justin
    I’ve got a message showing up for a Suppression Bus Fault. Transponder is working, although I know it is suppose to be connect to the GNS430, it also has a filter I believe to the KN64 DME. Looked at their manual but it didn’t leave me with much of an idea on what to look for.

    It is also suppose to have the WiFi module installed but doesn’t appear to be working.
     
    Last edited: Mar 27, 2021
  2. Clip4

    Clip4 Final Approach

    Joined:
    Jun 27, 2013
    Messages:
    6,138
    Location:
    A Rubber Room
    Display Name:

    Display name:
    Cli4ord
    Your avionics shop didn’t set the unit up properly.
     
  3. Skymac

    Skymac Pre-takeoff checklist

    Joined:
    Nov 9, 2015
    Messages:
    120
    Location:
    Kentucky
    Display Name:

    Display name:
    Justin
    A likely suspect of mine but also it has been installed for 2 years, we just purchased the plane and neither myself or my A&P have a good working knowledge of the system, first one we have seen. So was just maybe hoping someone here may be familiar with the install. A good, close avionics shop isn’t that easy to come by.