Question and some feedback on the in process install on a JPI 830 on a 182.
First off the product seems to be of very good quality. Nice packaging and instructions are fair. Keep in mind you will spend another $100 plus on supplies needed for the install (i.e. fittings for fuel transducer, Oil pressure, and MP).
Now for the questions - I have talked with JPI 5 times in concerns to these questions....which ended with the wrong part numbers provided and wasted money.
Does anyone know what part numbers to be used for the "T"'s on the MP and the oil pressure sensor? Both of these will be installed behind the existing gauges. The oil pressure line is a -6 and the oil pressure sensor has a 1/8 NPT male. I've also talked with several parts suppliers, they offer a "T", but only in a 1/4 NPT on the base of the "T". Thanks for any help!
First off the product seems to be of very good quality. Nice packaging and instructions are fair. Keep in mind you will spend another $100 plus on supplies needed for the install (i.e. fittings for fuel transducer, Oil pressure, and MP).
Now for the questions - I have talked with JPI 5 times in concerns to these questions....which ended with the wrong part numbers provided and wasted money.
Does anyone know what part numbers to be used for the "T"'s on the MP and the oil pressure sensor? Both of these will be installed behind the existing gauges. The oil pressure line is a -6 and the oil pressure sensor has a 1/8 NPT male. I've also talked with several parts suppliers, they offer a "T", but only in a 1/4 NPT on the base of the "T". Thanks for any help!