iPAD 11"

Discussion in 'Flight Following' started by Nathan N, Jan 8, 2019.

  1. Nathan N

    Nathan N Filing Flight Plan

    Joined:
    Nov 21, 2018
    Messages:
    24
    Display Name:

    Display name:
    Nathan
    Hello everyone,

    I just purchased the iPad 11" and haven't found any yoke mount cases online for it. Is anyone else using it?

    I think it might be too bulky..

    Any advise?

    Thanks,
    Nathan
     
  2. chartbundle

    chartbundle Line Up and Wait

    Joined:
    Sep 26, 2011
    Messages:
    881
    Location:
    State of Confusion
    Display Name:

    Display name:
    chartbundle
  3. chartbundle

    chartbundle Line Up and Wait

    Joined:
    Sep 26, 2011
    Messages:
    881
    Location:
    State of Confusion
    Display Name:

    Display name:
    chartbundle
    And I just realized my 10.5 is basically the same size as the 11, so here's the 10.5 in that RAM mount with a UAG case on it. I have never even thought of trying it on the Mooney Yoke though.

    https://photos.app.goo.gl/6JuGxqjQN1LyJV5HA
     
  4. CC268

    CC268 Final Approach

    Joined:
    Nov 4, 2015
    Messages:
    5,455
    Display Name:

    Display name:
    CC268
    The 11 is sweet though. Maybe use the MyClip and use it on your knee. Your right..I haven’t seen any mounts for it yet.
     
  5. Nathan N

    Nathan N Filing Flight Plan

    Joined:
    Nov 21, 2018
    Messages:
    24
    Display Name:

    Display name:
    Nathan
    Cool! I just ordered one off Amazon. I'll give it a whirl.
     
    CC268 likes this.
  6. Ryanb

    Ryanb Final Approach PoA Supporter

    Joined:
    Jul 21, 2010
    Messages:
    8,274
    Location:
    Tennessee
    Display Name:

    Display name:
    Ryan

    Ya think?????
     
  7. CC268

    CC268 Final Approach

    Joined:
    Nov 4, 2015
    Messages:
    5,455
    Display Name:

    Display name:
    CC268
    BTW MyGoFlight literally just released a iPad 11" mount. I think it is up for preorder. There stuff is pricey, but it is top notch. You can also use their Universal Cradle XL.
     
  8. MauleSkinner

    MauleSkinner En-Route

    Joined:
    Oct 25, 2005
    Messages:
    4,751
    Location:
    Wichita, KS
    Display Name:

    Display name:
    MauleSkinner
    A 2” lag bolt through the center of the iPad into the yoke works well. ;)
     
  9. Nathan N

    Nathan N Filing Flight Plan

    Joined:
    Nov 21, 2018
    Messages:
    24
    Display Name:

    Display name:
    Nathan
    Thanks I'll check it out! I purchased the MyClip you suggested. It should arrive today.
     
    CC268 likes this.
  10. sarangan

    sarangan Pre-takeoff checklist

    Joined:
    Jun 7, 2008
    Messages:
    398
    Location:
    Dayton, OH
    Display Name:

    Display name:
    Andrew Sarangan, CFII
    I would consider that to be far too large, and combined with the mounting hardware which tend to be heavier than the tablet itself, to pose a hazard in the cockpit. Just a little bit larger and then you can have a flat screen TV in the cockpit.
     
  11. CC268

    CC268 Final Approach

    Joined:
    Nov 4, 2015
    Messages:
    5,455
    Display Name:

    Display name:
    CC268
    While I agree that it is a bit on the large size, I disagree with the rest of your post. The iPad Pro 11" is the same size as the iPad Pro 10" that many people on here are using in the cockpit. The mounting hardware is heavy? What mounting hardware you using? That hasn't been my experience with ANY aviation mounting hardware.