Help needed in locating parts

[mapasha]

Any suggestions on finding the two part numbers listed below. Tailpipes for Cessna T310Q. Have not had any luck in locating these two items. Website/phone number/email/...... anything would be great.

K0850711-43 & K0850711-44

Thanks.

 

[Gary Austin]

KRN.com shows a couple -44, but no -43, wentworth and preferred airparts would be a couple other to try, wish you the best

 

[mondtster]

5 minutes of searching got me this.

https://awi-ami.com/cessna-310-320-401-402-exhaust-system-itemized-parts-list-mapped-image

http://aircraftexhaust.com/nav.cfm?...=0&as_id=3&mg_id=23&sys_id=203&display=system

 

[GRG55]

Try Acorn Welding in Edmonton, Alberta, Canada. Family run shop, been around forever, superb workmanship. They build and repair exhausts for virtually every aircraft out there, including radials and turbines.

I shipped both exhausts from my Aztec for rebuild to them this spring and they did a great job.

https://www.acornwelding.com/products/pdf/Cessna/Cessna Twins/Cessna 310-320 .pdf

 

[mapasha]

If it was that easy I wouldn't have posted on a public forum seeking assistant. Both of those places have already been contacted. NOT in stock at either of those places. There is even an order in place with AMI. Been a month with no date for availability at the moment.

Just because you can use a search engine and get results, does not mean parts are available.

5 minutes of searching got me this.

https://awi-ami.com/cessna-310-320-401-402-exhaust-system-itemized-parts-list-mapped-image

http://aircraftexhaust.com/nav.cfm?...=0&as_id=3&mg_id=23&sys_id=203&display=system

 

[mapasha]

Thanks. Will give them a call.

Try Acorn Welding in Edmonton, Alberta, Canada. Family run shop, been around forever, superb workmanship. They build and repair exhausts for virtually every aircraft out there, including radials and turbines.

I shipped both exhausts from my Aztec for rebuild to them this spring and they did a great job.

https://www.acornwelding.com/products/pdf/Cessna/Cessna Twins/Cessna 310-320 .pdf

 

[mapasha]

Yeah running into those kinds of issues. Thanks for suggestions.

KRN.com shows a couple -44, but no -43, wentworth and preferred airparts would be a couple other to try, wish you the best

 

[Tom-D]

Yeah running into those kinds of issues. Thanks for suggestions.

Have you called, http://www.dawleyaviation.com
when they don't have it in stock they will make it.

 

[mapasha]

Will do. Thanks! AWI-AMI does the same thing but they quoted many weeks out for new parts. Hopefully I have better luck with these folks.

Have you called, http://www.dawleyaviation.com
when they don't have it in stock they will make it.

 

[Tom-D]

Will do. Thanks! AWI-AMI does the same thing but they quoted many weeks out for new parts. Hopefully I have better luck with these folks.

Some times, it takes time.
also Knisley welding in Loomis ca. does repairs. https://knisleyexhaust.com

 

[mapasha]

Long story but tailpipes are no longer with the aircraft. Failed inspection. I have the rest of the exhaust back. But grounded due to the aforementioned missing tailpipes. Getting close to 3 months now!

Some times, it takes time.
also Knisley welding in Loomis ca. does repairs. https://knisleyexhaust.com