2nd505th
Pre-takeoff checklist
- Joined
- Apr 11, 2018
- Messages
- 108
- Display Name
Display name:
2nd505th
Looking for someone with wiring experience.
Assumptions:
1) The Radio portion cannot connect up to an overhead 8 ohm speaker.
2) Pin 7 of port P3552 essentially goes to my headset via the Audio Control Panel (ACP)?
3) My ACP does not have a Audio LO input. So what do I do with pin 18 on port P3552. Do I ground it or only loop it to port 18 and is port 18 really Headset sidetone input?
The wiring guide is here, please look at page 108:
http://www.accelerationtech.com/photos/mooney/2652W/GNC-355/190-02207-A5_01.pdf
I know this question really is for Garmin support but maybe I'll get better answers here.
Assumptions:
1) The Radio portion cannot connect up to an overhead 8 ohm speaker.
2) Pin 7 of port P3552 essentially goes to my headset via the Audio Control Panel (ACP)?
3) My ACP does not have a Audio LO input. So what do I do with pin 18 on port P3552. Do I ground it or only loop it to port 18 and is port 18 really Headset sidetone input?
The wiring guide is here, please look at page 108:
http://www.accelerationtech.com/photos/mooney/2652W/GNC-355/190-02207-A5_01.pdf
I know this question really is for Garmin support but maybe I'll get better answers here.
