I tried to interpolate a young lady one time.
Man, did she slap me cross eyed.
How does one actually get their groundspeed vector while in the air?* Airspeed and heading is easy, but the second vector (groundspeed and course) needed to calculate the winds aloft vector isnt so easy to measure.
*I know technically how. Time and distance between 2 known points, plot that line, and measure course with plotter. easy on the ground, not so much in the air. Is this something a pilot is expected to do on his lap?
If one were to fly a Cessna 172 North-West through South Dakota, would the plane be exceeding Vne (100 knots normal cruise + 80 knots of wind)? If one flew South-East through the same area, would the 172 in level flight stall and drop out of the sky?
Will the airspeed indicator show 180 and 20 knots, respectively?
Edit to add the real question in my brain: Is it safe to fly a light single through that area?
Will the airspeed indicator show 180 and 20 knots, respectively?
Edit to add the real question in my brain: Is it safe to fly a light single through that area?
Let's say it's perfectly calm, and you are tooling along at 100 KIAS on a course of 000. 1 second later a hypothetical wind appears from the middle of nowhere, blowing from 180 at 80 Knots.
I understand that the propeller is still pulling the plane along at a rate that would equal 100KIAS in calm air. But doesn't the 80 knot wind airflow somehow interact with the 100 knot airflow from the plane's forward motion, in effect "reducing" the lift to that of an airfoil with 20 knots of air speed?
Assume you have a headwind of 20 knots, and you need 55 knots airspeed to generate enough lift to take off. Standing still, you already have 20 knots indicated. You only need to accelerate an additional 25 knots. It takes less time (and therefore a shorter takeoff roll) to accelerate 25 knots than if you have to accelerate 55 knots.I guess what is confusing me is that planes can shorten their takeoff roll by taking off into a headwind. The headwind component during the takeoff roll increases the lift beyond that produced by the plane's forward movement. Or is this a special circumstance because the plane is still on the ground?
But when you have a head wind, your plane is being pushed back at a rate equal to the headwind.
Can you hover a GA single, if you have enough wind?
In other words, Thrust + Wind = IAS.
IAS below stall speed = falling out of the sky,
I am not sure what you mean here. Assuming a constant wind, then ground speed would equal airspeed plus/minus wind. If you have gusty winds, the planes inertia will resist the change in speed from a gust, but it will accelerate or decelerate back to the equilibrium airspeed, although the ground speed would be different until the wind returns to what it was before the gust kicked up. Before the plane returns to the equilibrium airspeed for your power setting, you would see temporary spike or drop in the indicated airspeed.but a headwind greater than the difference between stall and cruise just means you move slower compared to the ground...
I am not sure what you mean here. Assuming a constant wind, then ground speed would equal airspeed plus/minus wind. If you have gusty winds, the planes inertia will resist the change in speed from a gust, but it will accelerate or decelerate back to the equilibrium airspeed, although the ground speed would be different until the wind returns to what it was before the gust kicked up. Before the plane returns to the equilibrium airspeed for your power setting, you would see temporary spike or drop in the indicated airspeed.livitup said:but a headwind greater than the difference between stall and cruise just means you move slower compared to the ground...
livitup;1075240.....Am I thinking this through correctly?[/QUOTE said:Yup.....
Remember, you can stall a planes wing at any airspeed or attitude... Just an aside and not necessarily related to the current flying thru a moving airmass discussion.