Greg Bockelman
Touchdown! Greaser!
- Joined
- Feb 23, 2005
- Messages
- 11,101
- Location
- Lone Jack, MO
- Display Name
Display name:
Greg Bockelman
Tom, or anyone with an idea,
When my cabin gets hot, my primer does not work well. The hotter it gets, the less it works. It got to the point where it wouldn't work at all. This is in a Cessna 195. I am not the only one who has the problem. But not everyone has the problem. The big issue here is that the engine will absolutely not start unless it gets primed. I wrapped an ice cold wet towel around the primer and it helped just a little bit.
Has anyone had the same problem and if so, is there a solution?
When my cabin gets hot, my primer does not work well. The hotter it gets, the less it works. It got to the point where it wouldn't work at all. This is in a Cessna 195. I am not the only one who has the problem. But not everyone has the problem. The big issue here is that the engine will absolutely not start unless it gets primed. I wrapped an ice cold wet towel around the primer and it helped just a little bit.
Has anyone had the same problem and if so, is there a solution?