anr battery box switch guard

[GeorgeC]

If your anr headset has a battery box that looks like this, you can fashion a switch guard with about 1/4" of a bic pen barrel and some hot glue, preventing inadvertent toggles from eating your battery.

 

[Dan Thomas]

If your anr headset has a battery box that looks like this, you can fashion a switch guard with about 1/4" of a bic pen barrel and some hot glue, preventing inadvertent toggles from eating your battery.

If your ANR headset has a battery box like mine did, there was nothing in that box but the switch and the battery. I attached a 9-volt battery clamp clip to my headset headband, wired in a 9-volt battery terminal clip (from the box) and installed the switch (also from the box) in the headset cup. Clipped half of the switch lever off to minimize inadvertent operation.

No more box flopping around.

Dan