Fearless Tower
Touchdown! Greaser!
Lots of maintenance shops and A&Ps there, but haven't seen any reviews on the web - anyone to be recommended?
A&P Recommendations in Chino (CNO)
- Thread starter Fearless Tower
- Start date
schmookeeg
En-Route
For a DC3? Grab one of the Planes of Fame Museum wrenches 
Without knowing your hardware, it's tough to recommend someone.
Without knowing your hardware, it's tough to recommend someone.
Fearless Tower
Touchdown! Greaser!
Cessna 170For a DC3? Grab one of the Planes of Fame Museum wrenches
Without knowing your hardware, it's tough to recommend someone.
schmookeeg
En-Route
If you'll need structural style repairs, Aircraftsman is hard to beat. Mark knows his stuff when it comes to heavy work.
CVA gets good reviews for the routine stuff, albeit pricey and a wee bit slow.
For an independent, I would try Scott Dupuis, who is based there. vwav8tr@gmail.com -- he tends to be busy, but he'll do a nice job.
If you wanna come a pinch south to Corona, we can crank a 170 around pretty quick, and our shop rate is inexpensive at $59/hr. We can fly/drive ya back and forth to CNO too We're on the dry end and were unaffected by the floods, and have been in biz throughout.
Hope it helps Best of luck on the hunt.
Cheers,
- Mike
CVA gets good reviews for the routine stuff, albeit pricey and a wee bit slow.
For an independent, I would try Scott Dupuis, who is based there. vwav8tr@gmail.com -- he tends to be busy, but he'll do a nice job.
If you wanna come a pinch south to Corona, we can crank a 170 around pretty quick, and our shop rate is inexpensive at $59/hr. We can fly/drive ya back and forth to CNO too
We're on the dry end and were unaffected by the floods, and have been in biz throughout.Hope it helps
Best of luck on the hunt.Cheers,
- Mike