Donny Hughes
Pre-Flight
- Joined
- May 28, 2019
- Messages
- 41
- Display Name
Display name:
Taildrager
I am getting started on taking fabric off my Citabria and i know my former's /plywood bulkheads were bad . But they are so rotten on the bottom I will not be able to use them for a pattern .
I realize they can be bought from ACA and Rainbow for a reasonable price . But I have already made new floors and have enough material to make them in addition to that I have the equipment to make them .
My hope is some one here has a set that would trace the bottom 12 to 14 inches or what might be another option it they had an old set that they replaced that I could get . With the second chose I could use them for a pattern and cut them out with a router .
Thanks in advance Donny
I realize they can be bought from ACA and Rainbow for a reasonable price . But I have already made new floors and have enough material to make them in addition to that I have the equipment to make them .
My hope is some one here has a set that would trace the bottom 12 to 14 inches or what might be another option it they had an old set that they replaced that I could get . With the second chose I could use them for a pattern and cut them out with a router .
Thanks in advance Donny
