Search results

Thanks for the feedback, the diagram confirms my wiring. My voltage drop is with no load, just the master on. I actually opened up the contactor seeing that i just ordered a used one. I found a half a teaspoon of dust, and everything is covered in rust. I guess that would do it.

My Comanche 260 starter is cranking so slow that it fails to start. I found a voltage drop at my master solenoid from 12.5 V to 9.6 V. I took pictures of the wire connections,, and I’m wondering whether it is wired correctly. I need to find a used/other new solenoid, but want to be absolutely...

Long and short. A new flap motor solved the problem

I just want to provide some feedback. I inspected the rollers of one flap. They were the upgraded nylon bushings, and they were dry lubed. Once the flaps are engaged fast 0°, I was able to test the resistance by pushing on the flaps down by hand in order to extend them. I did not feel any...

I will appreciate any pointers. I have no problem retracting likely due to spring assist, but will sound like it is labouring extending the flaps. It will trip the breaker doing this. The flap motor becomes very hot to the touch after 2 cycles. I am able to freely turn the worm mechanism by...

I have to admit that I am surprised at the animosity towards Dan. I have been watching all his videos, and I appreciate the effort he is putting forward. He has an opinion and is not shy to express it. That ruffle some of the more “sensitive” aviators feathers, but I have not seen anybody with...

It was found. In the tail section behind the rear seat bulk head. May it help somebody with the same problem!

I saw that gear solenoid up high on the left! I spend a bit of time behind the panel tonight. I still cannot find the regulator. I went through the engine side, and used an inspection camera for the hard to see spots behind the panel. No luck! I will have to follow the field wire, but there...

No luck. There is a solenoid, but no regulator. I am still looking......

Thank you sir. I will look there again.

For the life of me I cannot find my faulty voltage regulator on my 260C. Where did Piper hide this?