What to Fill Those Pesky Holes in Interior Plastic With

[Arrow3_Dawg]

Greetings,

My 1977 Piper Arrow III has several little (1/4” - 1/2” diameter) holes in various locations in the interior plastic trim. I’m sure some of them are from the old curtain rods that were installed, but there are a few others as well. My question is where can I get some plastic plugs or caps to cover the holes? Any help would be greatly appreciated!

John

 

[Huckster79]

TrueValue in the aviation aisle...

Typically they sell plastic plugs for body and trim n such for autos....usually in those drawers of odd ball hardware needs by the nuts n bolts... if you need to paint them to match Dupli-Color makes a vinyl/cloth paint that does a good job...

 

[SoCal RV Flyer]

It might be hard to find plugs that fit exactly.

I'd use a Unibit to enlarge the holes slightly to accept the plugs, if necessary.

 

[Bell206]

My question is where can I get some plastic plugs or caps to cover the holes?

Install screw/nuts to fill hole or rivets. You can touch up or leave as is.

 

[Clip4]

Fill holes with this and sand.

https://www.acehardware.com/departm...e-glues-and-adhesives/glues-and-epoxy/1062652