I agree. Can you offer any info regarding the two components? My first question would be does the thermocouple require DC voltage and then connects to the gauge with a second pair of wires? Perhaps is it the other way around: does the gauge get voltage and then has a pair of wires to the...
1973 172M. Has a CHT gauge (analog style) that the previous owner said had not worked for a very very long time. The probe (supposedly on the #3 cylinder) 4-cyl Lyc E2D is disconnected I think as it was Inop for so long no one bother reconnecting. How hard is it troubleshoot/replace the analog...
So here's how I missed a flying lesson on a perfect day to fly and then was nearly kicked out of a machine shop due to a low voltage light. Cranked up my Cessna 172M. The Alternator is a Ford. I believe it's as old as the early 90s. In around 2006 these were changed per my logbook: the...
I've taken a moment to look at the GDL 82.. I'd agree this would be the best "low buck" solution and the price is very comparable to the SkyBeacon. I also looked at the Appareo ESG. If I understand this correctly, this transponder does it all? ADS-B out with all included WAAS antennas, etc so...
Thanks for all the info. Regarding the SkyBeacon, your reasons to (re)consider it are some of what made me want to look at other options. I'm going to do a bit of research on the components you mentioned. I'm not looking to be as cheap as possible, but also not looking to spend an endless amount...
I'd say if I can get the transponder and have it installed for $3000-$4000 I'd be happy. I do not have any intentions of upgraded to a WAAS GPS. Will WAAS be required in order to use the KT74 (and ultimately ADSB)?
The avionics in my airplane is pretty elementary. My two radios are TKM MX300s...
My first post on POA. Finally decided to sign up. I'll apologize in advance if I'm beating a dead horse here but I'm looking for some info and ultimately opinions of other plane owners. I've recently purchased a C172M and am a student pilot. I have a (working) KT-76 transponder and am trying to...