DaleB
Final Approach
Complete, ready to run Stratux ADS-B IN solution, just connect power and go.
Commercial molded ABS case with fan (not 3D-printed)
Raspberry Pi 3 Model B
978 and 1080 SDR receivers with antennas
Internal GPS receiver (GPYes)
AHRS and fan controller board
16GB Micro-SD card with adapter
USB cable for power
Loaded with the latest Stratux release 1.5B2. Just to sweeten the pot a little, if you send me your tail number and Mode S code I'll customize the unit so you don't have to take the five minutes it would take to do it yourself.
Asking $150 including shipping to the lower 48.
Commercial molded ABS case with fan (not 3D-printed)
Raspberry Pi 3 Model B
978 and 1080 SDR receivers with antennas
Internal GPS receiver (GPYes)
AHRS and fan controller board
16GB Micro-SD card with adapter
USB cable for power
Loaded with the latest Stratux release 1.5B2. Just to sweeten the pot a little, if you send me your tail number and Mode S code I'll customize the unit so you don't have to take the five minutes it would take to do it yourself.