OkieAviator
Pattern Altitude
- Joined
- Aug 17, 2014
- Messages
- 1,859
- Display Name
Display name:
OkieAviator
I have this 200A Navomatic wing leveler installed in my plane. Here's a picture of the thing. I've read through some old documentation I found on the internet to try to see if it works but I'm not having any luck. I turn the A/P switch to on.. press Dir Hold and nothing happens. The only time I see anything is if I switch from Nav 2 to Nav 1, then both the CDI go full deflection to the left and up. But nothing after that.
Looking in the log book I can't find anything about the servos being removed or really anything about this device. I'm speculating it's all in there but really don't know.
So my multi part question is for someone who has used this, is there a better way to test this? Going off the assumption that it's broke should I just slap an inop sticker on it until I get it removed at a future date? Lastly where would the servos for the ailerons be if they're in the plane? For reference it's a 1977 172N.
Looking in the log book I can't find anything about the servos being removed or really anything about this device. I'm speculating it's all in there but really don't know.
So my multi part question is for someone who has used this, is there a better way to test this? Going off the assumption that it's broke should I just slap an inop sticker on it until I get it removed at a future date? Lastly where would the servos for the ailerons be if they're in the plane? For reference it's a 1977 172N.