Dav8or
Final Approach
I'm looking to get my Slicks IRANed as they are at 500 hours. Any personal experiences?
Recommendation for a good Magneto shop?
- Thread starter Dav8or
- Start date
weirdjim
Ejection Handle Pulled
- Joined
- Jul 8, 2008
- Messages
- 4,171
- Location
- Grass Valley, CA (KGOO)
- Display Name
Display name:
weirdjim
We've got a fellow here on the field that is one of the best mechanics I've ever known and is an absolute genius on Slicks. And, he works out of his shop on the ranch so his labor costs are quite reasonable. Want me to see if he is amenable to the job? If so, I'll put you two into direct contact and stay out of the middle.
Jim
flyingriki
Ejection Handle Pulled
- Joined
- Nov 25, 2008
- Messages
- 910
- Display Name
Display name:
flyingriki
This fellow is great. Been at it for many, many years. See prices on his site for basics:
http://www.aircraftmagnetoservice.net/
Attachments
Geico266
Touchdown! Greaser!
Central Cylinder, Omaha, NE.
Kiddo's Driver
Pattern Altitude
- Joined
- Oct 5, 2013
- Messages
- 1,500
- Location
- Somewhere in the Southeast
- Display Name
Display name:
Jim
I used http://www.qaa.com/ for mine. Other than the fact that they put one of them back together wrong the did good work. 
My A&P had to take it apart and move the timing gear over by one tooth.
That and we are still trying to figure out if I paid them or not. I gave them a credit card number back in October. In March they contacted me about an over due payment.
Other than that they did fine!
Jim
My A&P had to take it apart and move the timing gear over by one tooth.
That and we are still trying to figure out if I paid them or not. I gave them a credit card number back in October. In March they contacted me about an over due payment.
Other than that they did fine!
Jim
