Need some help with spare parts...

[Armageddon Aviator]

I am contemplating the idea of building a personal home-cockpit for simulation.

In that perspective, I am trying to locate used Cessna parts such as throttle, pitch and mixture levers as well as a pitch trim wheel.

I would be grateful if provided with information on where to get that kind of parts,

Thanks in advance


P.S. If you have 30,000 $ to spare - you can buy a cocpit like the one in the attached picture...

 

[jesse]

For $30,000 I would much rather buy the plane.

 

[KennyFlys]

For that, you can get a decent Cessna 152 and a used Garmin 430, maybe 530.

 

[Let'sgoflying!]

ebay has a bunch from time to time

 

[NC Pilot]

Have you checked the garbage cans at the local A&P's? Sometime they have some of the parts ye seek.

Other than that, you could check with one of several salvage yards.

 

[AdamZ]

Alon there is an old rottinng 150 and a 172 at Wings I'll check to see what the status is and if its a go I'll send the stuff over with a buddy who is going to Technion in June.

 

[Armageddon Aviator]

Thanks a lot for the answers and advice...

Adam - I sent you a personal message

 

[SCCutler]

Thanks a lot for the answers and advice...

Adam - I sent you a personal message

Sending out an SOS...