poadeleted20
Deleted
- Joined
- Apr 8, 2005
- Messages
- 31,250
What we've got is a KPI-series Bendix/King HSI (electric, slaved). The GS needle reads half-scale higher than it should. Other than being half-scale high, the HSI GS indicator does track the GS. When the GNS-530 to which it is connected goes through its power-up tests, and the GS needle is supposed to be half-up, it's full up. In flight on the ILS, it reads half-scale higher than the GS on the #2 CDI which is hooked to a KX-170B, and the #2 is confirmed accurate.
First, any ideas on what's wrong?
Second, any recommendations on an avionics shop to fix this within 200nm of Erie PA?
First, any ideas on what's wrong?
Second, any recommendations on an avionics shop to fix this within 200nm of Erie PA?